Installation Instruction
Suzhou Jernano Carbon Co., Ltd.
Tel: +86-512-62872764
Add: NO.398 Ruoshui Road, Suzhou Industrial Park, China;
Instructions for the use of Turbo Heat apparel heating system
1. Product model
product name specification
control
mode
voltage current size
Turbo heat 2.0
ACLAN-T3108
B00
temperatu
re control
5V/9V 0-2A
22*15cm,1
12*15cm,2
2. Installation instruction of apparel heating system
The structure and size of the carbon nanotube clothing heating system are shown in
Figure 1
FIG. 1 Schematic diagram of clothing heating system structure
3. Instruction of controllers
The heating plate is temperature controlled, divided into 4 levels, the temperature is
respectively 38℃,42℃,46℃,50℃,The use of controllers is followed by following
steps:
1) The four levels are shown by white, green,purple and red light.
2) Turn on the controller when a 5V/9V battery is connected to it. LED shows red
light in the controller, which is fourth level, The temperature is 50℃.
3) LED shows orange light pressed the controller one time when LED shows purple
light. The heating system is adjusted to the third level,The temperature is 46℃.
4) LED shows green light pressed the controller one time when LED shows green
light. The heating system is adjusted to the second level,The temperature is
42℃.