Installation Instruction

苏州捷迪纳米科技有限公司
product specification
1. Product model
Designation
Carbon nanotube apparel heating system
Specification
JD-F4113
Control mode
Constant
temperature
control
Voltage
5V
Current
0-2A
2. Controller usage specification
• The model heating system is Temperature control，Three temperature
levels can be controlled by a controller, the temperature are 38, 46，
and 53 centigrade respectively。The operation modes are as follows：
• The Three levels are shown by white, orange and red light.
• The heating system starts heating when a 5v battery is connected to
it. LED shows White light in the controller, which is fourth level
on 38 centigrade.
• LED shows Orange light pressed the controller one time when LED
shows White light. The heating system is adjusted to the first
level on 46 centigrade.
• LED shows Red light pressed the controller one time when LED
shows Orange light. The heating system is adjusted to the first
level on 53 centigrade
• The heating system is power off pressed the controller one time
when LED shows Red light.
3.Installation instruction of apparel heating system
Structure and size of carbon nanotube apparel heating system is
shown in Fig.1. Please pay attention to the sensor of temperature
red marked in Fig.1. The sensor is not pressed and bent hardly. The
apparel heating pieces are sewed to apparel along the shade area.