User's Manual

User Manual

1. ON/OFF，toggle on/off when click.

2. Dim up

• Click- Dim up 10%.

• Press and Hold- Step to 100% (3s from 0% to 100%).

3. Dim Down

• Click- Dim up 10%.

• Press and Hold- Step to 100% (3s from 0% to 100%).

4. “..”

• CCT.( 4 fixed value switch)

• Custom scene （Switch up to 3 scenes）

5. “...”

• DIM.（3 fixed value switch）

• Custom scene （Switch up to 3 scenes）

6. Long press the RESET button on the back for 3S to restore factory Settings and

enter the state of distribution network, and the red indicator will blink for 30s.

7. Once the network has been configured, click the RESET button on the back for 1s

to wake up 60s for OTA upgrade.

PAGE 1
User Manual 1. ON/OFF，toggle on/off when click. 2. Dim up • Click- Dim up 10%. • Press and Hold- Step to 100% (3s from 0% to 100%). 3. Dim Down • Click- Dim up 10%. • Press and Hold- Step to 100% (3s from 0% to 100%). 4. “..” • CCT.( 4 fixed value switch) • Custom scene （Switch up to 3 scenes） 5. “...” • DIM.（3 fixed value switch） • Custom scene （Switch up to 3 scenes） 6.
PAGE 2
Product Information: Product name RAB BLUE REMOTE Model No. LCBLUEREMOTE/W Test Model No. LCBLUEREMOTE/W Power Supply 2.3V~3.3V Software version V1.0 Hardware version V1.0 Peak Antenna Gain -0.63dBi Bluetooth Version BL5.
PAGE 3
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.