Specifications

Manual Folding
• Not suitable for use with dimmers and sensors
unless specifically designed for RAB Lightcloud
Blue Lamps.
• Risk of electric shock.
• Do not use where directly exposed to water.
• Not intended for use with emergency exit fixtures
or emergency lights.
• Only install in operating environments between
-4°F and 104°F (-20°C to 40°C).
• Only use the control provided with or specified by
these instructions to control this lamp. This lamp will
not operate properly when connected to a standard
(incandescent) dimmer or dimming control.
Hello
1(844) LIGHTCLOUD
1(844) 554-4825
Front
Back
Product Features & Specifications
1(844) LIGHTCLOUD
1(844) 554-4825
WE’RE HERE TO HELP:
Welcome
©2022 RAB LIGHTING Inc.
Made in China.
Pat. rablighting.com/ip
1(844) LIGHTCLOUD
1(844) 554-4825
WE’RE HERE TO HELP:
Method 1: Manual
Power the lamp off and on 5 times
consecutively. Do not allow more than 2
second to elapse between switching. The
lamp will flash 3 times, then reset to 100%
brightness at default CCT.
If your Lightcloud Blue Smart RGB A19 is already paired, you can
reset it by using the below methods.
Method 2: Reset Tool
1-10 devices
10 or more devices
The reset process must be done by professional
electricians qualified by RAB. Reach out
to your RAB sales manager to request a
Reset Tool. The tool simply needs to be
placed directly on the lamp for 2 seconds.
The lamp will flash 3 times, then reset to
100% brightness at default CCT.
5
X
LCBA19-9-E26-9RGB-SS
Pre-Installation
Installing your Lightcloud Blue Lamp
Installing your Lightcloud Blue Lamp
(cont’d)
LED A19 with Tunable RGB
Lightcloud APP
<=70 ft.
DRYWALL
OR SIMILAR
Add an additional
Lightcloud Device to
extend network range
around corners
BRICK,
CONCRETE, OR
METAL WALL
Find a suitable location
Use these guidelines when installing devices:
• If there is a clear line of sight between a Lightcloud Blue
Smart RGB A19 and another Lightcloud Blue device they can
be placed up to 200 feet apart.
If a Lightcloud Blue Smart RGB A19 and another Lightcloud Blue
device are separated by ordinary drywall construction, try to
keep them within 70 ft. of each other.
Brick, concrete and steel construction may require additional
Lightcloud Blue devices to go around the obstruction.
•
•
Lightcloud
Safety Information
Lightcloud
1(844) LIGHTCLOUD
1(844) 554-4825
WE’RE HERE TO HELP:
Welcome
LCBA19-9-E26-9RGB-SS
LED A19 with Tunable RGB
Lightcloud
Catalog Number:
LCBA19-9-E26-9RGB-SS
Model Number:
LCBA19-9-E26-9RGB-SS
Electrical:
Construction:
Lamp Base: E26
8.8W, 800lm
120Vac
60Hz
Lightcloud Blue is a wireless lighting control system that allows you
to control RAB Lighting's various compatible devices with your
mobile device. Lightcloud Blue lamps are wirelessly controlled
locally via the Lightcloud Blue app. Get even more features like
secure remote control capability from anywhere that has an internet
connection. Lightcloud Gateway and Bridge devices are required to
access premium features.
Controlling your Lightcloud Blue Device
Setting Device to Pairing Mode
Wirelessly control from your mobile device
On, off and dimming
Color tuning
Wireless remote control
Create custom scenes
Lived-in look vacation mode
Sensor compatible
SmartShift automated circadian schedule
Schedules and automations
Direct Connect LED, No Gateway or Hub required
Lightcloud Blue is a wireless lighting control system.
It’s powerful and flexible, yet easy to use and install.
Learn more at www.lightcloud.com
1
Turn off power
• Place the wall switch in the off position.
• Turn off the main power at the breaker
panel or remove the fuse from the fuse box.
Confirm your device is connected and powered on.
1
2
3
4
5
6
Download the Lightcloud app from the Apple App Store or
Google Play store.
Launch the App and create an account.
Tap the "add device" icon in the app to start
connecting devices.
Follow the remaining steps in the app. Create areas, groups,
and scenes to organize and control your devices.
You're all set!
Connect device to power.
After installed, turn the power on and
the lamp will enter pairing mode
automatically if it has not already been
paired. Once the lamp has been paired, it
will indicate by flashing on and off 5 times
and then dim to 30% brightness.
OFF
OFF
WARNING
Functionality
WE’RE HERE TO HELP:
1 (844) LIGHTCLOUD
1 [phone]
[e-mail]
using the Lightcloud Blue app.
FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1. This device may not cause harmful
interference, and 2. This device must accept any interference received,
including interference that may cause undesired operation.
To comply with the FCC’s RF ecposure limits for general population /
uncontrolled exposure, this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or
transmitter. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to operate the
equipment.
CAUTION: Changes or modifications to this equipment not expressly
approved by RAB Lighting may void the user’s authority to operate this
equipment.
Note : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates,uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help