Eavision Agricultural Automatic Sprayer User Manual V2.1 / 2022.
Table of Contents Product overview ........................................................................................................................................................ 2 Disclaimer .................................................................................................................................................................... 3 Aircraft system composition ....................................................................................................................
Product overview The EA-20X series of low-altitude all-area detection plant protection drones are the multi-rotor plant protection drones launched by Suzhou EAVISION Robotics Technologies Co., Ltd. Build upon the company’ s industry-leading binocular vision technology, the drone can complete plant protection services for various terrains and crops. Listed below are the product functions: Autonomous obstacle avoidance means there is no need for users to map specific obstacles.
Disclaimer Thank you for choosing EAVISION EA-20X series of autonomous plant protection drones developed and manufactured by Suzhou EAVISION Robot Technologies Co., Ltd. (hereinafter referred to as "EAVISION Technologies"). All users should familiarize themselves with the operation and maintenance of EAVISION produced equipment.
the obstacle avoidance function, there is a risk of collision, and the user must bear the risk of collision and loss. Try not to fly in areas where magnetic field interference is likely, or in radio interference areas (such as high-voltage towers, large power equipment, radio and television transmission towers, mobile phone base stations, etc.). If operation of the drone is necessary, it is pertinent to ensure that no idle person is within 200 meters of the operating area.
Technical parameters 1070 mm @ Front and rear power axles Wheelbase 1330 mm @ Left and right power axles Aircraft 24.55 kg(Standard Model) Bare Frame Weight 25.25 kg(All-Terrain Model) Dimensions (without propellers) 1430*1170*510 mm Arm Lengths 506 mm Folded Aircraft Dimensions 960*620*510 mm Liquid Container 15L/20 L 0.7 m(Centrifugal) Spraying Nozzle Minimum Operation Height 1.
Liquid Atomization 10-100 μm Liquid Flow 400 ~3500 ml/min Fan 4~5 m Suitable for this drone EAVISION EA2020, EA-20X Battery Type Lithium Ion Battery 13S Voltage 48.75 V Energy Output 975 Wh Weight Around 6.75 Kg Discharge Ambient Temperature Range 3℃~55℃ Ambient Temperature Range for Charging 3℃~55℃ Average Charge Duration 18 min Charger model JM-C1-5000W Compatible battery model JM1-20000mAh-48.75V Input voltage/frequency 90-264 VAC/50-60 Hz Charging voltage 55.
Fuel Tank Capacity 15 L Engine Output 236 CC Maximum Engine Power 6000 W Engine Speed 3700 RPM Fuel Type #92 Petrol Oil Type SE15W-30W Fuel Consumption ≤0.50 L/KW Dimensions (Not including handles and Remote control antenna) 189*138*41mm Operation Frequency 5.8 G Transmission Distance 1.
Remote control Overview EAVISION remote control adopts new advanced high-definition image transmission communication technology, with adaptive frequency band, which can automatically select the working frequency band with the lowest interference. The remote control is equipped with omnidirectional antennas as standard, and the image transmission and control distance can reach 1.2 to 1.8 kilometers. It carries Qualcomm Snapdragon 8-core CPU, which can decode 1080p @ 60fps video stream by hardware in both H.
Remote control parts 1. Antenna Transmit aircraft control signals and image transmission signals 8. 3-Gear Switch GPS mode/free mode 9. Joystick 2. Centering Dial (customizable) Control the flight direction of the aircraft 10. Power 3. 3-Gear Switch Turn on/off the remote control, display the Manual/automatic control battery level 4. Joystick Control the flight direction of the aircraft 5. Status Indicator 11. Button (customizable) 12.
Remote control ports Overview - Transmitter Top Overview - Transmitter Bottom 1. Standard HDMI Port 5. TF Card Slot External display, video output External storage 2. 4P DATA Port 6. SIM Card Slot External RTK port Access to mobile network 3. USB-A Port 7. 4P DATA Port External U drive External RTK port 4. 1/4" Threaded Hole 8.
Remote control operation Power On/Off 1. When the remote control is off, short press the power button once, the battery indicator will light up, if the battery is low, please charge it. 2. When the remote control is turned off, short press the power button for about 1 second, the battery indicator lights up, then press and hold the power button for about 2 seconds. When the battery indicators light up in sequence, the remote control is turned on. 3.
Operating the aircraft The joystick mode of the remote control can be changed in "System Settings" in "SIYI TX" APP.
Linking 1. Enter "System Settings" in "SIYI TX" APP, find “Frequency” and click "Start". 2. The status indicator of the remote control will flash red quickly, and it will display “Linking” on the screen. 3. Press and hold the link button of the receiver for 2 seconds, the receiver status indicator will flash red quickly. 4. Wait for 5~10 seconds. When the linking is successful, the status indicators of the remote control and the receiver will turn green.
Remote control indicator The status indicator of the remote control has different meanings by flashing three colors and different flashing frequencies.
Checklist before use 1. Check whether the equipment is complete before operation EA-20X aircraft Remote control Battery Charging station Surveying tool Mobile base station 2. Check aircraft Check whether the aircraft arm sleeve is properly tightened and whether the screws are securely in place, especially the motor fixing screws and propeller fixing screws. If they are loose, please reinforce by screwing the loose screws back in. Check whether the aircraft landing gear.
Operating instructions 1. The Smart AG App Smart AG is an important software for controlling the aircraft. Its main functions include task sending, route planning, spraying parameter settings, operation mode settings, flight parameter settings, forwarding differential signals, and aircraft data interaction, etc. . 1) Download the App The App works with Android systems. Scan the QR code below to download the App. Please check the version before using the App and update it if prompted. 2.
4. Map and survey The surveying tool is used to survey the desired operating boundaries to provide the aircraft with more accurate boundary information, thus laying down a reliable ground map for any precision spraying operation. The steps are as follows: Go to an open area and ensure that the GPS antenna is not obstructed. The GPS indicator should always be on, and the device should search for satellite signals.
After the ESC emits three short, high pitched sounds, do a self-check and wait for the drone to broadcast a ready to operate notice. Plan routes, set parameters, and upload the information into the piloting program. Always ensure that there is no one within 10 meters when the drone takes off. 7. Land After the task is complete, the drone App will make a request to land, confirm the request to initiate landing procedures.
5) Recommended replacement time for specific parts Water pump: We recommend that the cumulative max of 200 ha is when inspection and replacement will become necessary. Centrifugal nozzles: We recommend that the cumulative max of 200 ha is when inspection and replacement will become necessary. Mist nozzles: We recommend that the cumulative max of 267 ha is when inspection and replacement will become necessary.
List of dangers and hazards Type Number 1 Description Recommended Response Rotating propeller hazard Seek Medical Attention Immediately Use sand or a fire extinguisher to douse out 2 Accidental battery fires the fire Seek 3 medical attention and attempt to Pesticide residue on skin immediately wash off with water Dangers Try the hover and if unable to resort to crash 4 Drone escapes designated flight area landing Aircraft accident caused by improper 5 Continue pilot training pilot operat
Fault handling instructions Fault Handling Instructions Navigation Failure 1) Power on the drone again (make sure the entire system is powered off and then powered on again), if the problem is fixed, you may continue operations. 2) If the problem persists, the aircraft should be powered off (including backup batteries) and proceed to contacting customer services.
before switching. Failure to Locate Safe Zones 1) Check whether there are any obstacles between the take-off point and the operation area. If there are no obstacles, you may continue. 2) If there is an obstacle between the take-off point and the plotted area, we recommend relocating to a new zone. Manual Operation 1) If you can see the aircraft and nearby obstacles clearly, you may attempt manual operation. 2) If you can't see the plane and obstacles, and don't know the environment well, click “Return”.
Warranty The scope of the "Warranty" warranty for EAVISION aircraft products: Products subject to free warranty service must meet the following requirements: Normal use within the specified product warranty period Quality reasons such as product performance failure The carrier code, factory label and other markings should be consistent with the information on the order confirmation with no signs of tears or alterations Provide legal and valid proof of purchase (contract or invoice) and a warranty c
List of “Warranty” EAVISION Components List # Parts name Warranty period 1 Flight control 12 Months 2 CPU 12 Months 3 Power distribution board 12 Months 4 GPS and signal communication equipment 12 Months 5 Cameras 12 Months 6 Distance sensors 12 Months 7 Spraying control module 12 Months 8 Base station equipment and charger 12 Months 9 Surveying tool and charger 12 Months 10 Airframe 12 Months 11 Tank 12 Months 12 Remote controller (including receiver) 12 Months 13 Ch
Nameplate Refer to the nameplate for the factory number and model number FCC Statement Please take attention that changes or m odification not expressly approved by the party responsible for com pliance could void the user’ s authority to operate the equipm ent This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may
Appendix I EAVISION Robotics Technologies Warranty Certificate (Customer) Product Name Autonomous Plant Protection Drone Model Product Specification Information Manufactured In Suzhou, China Serial Number Name Address Phone Number Email Sales Unit Address Contact Number Email Sales Date Unit Price Invoice Number Sales Unit Stamp Manufacturer Manufacturer Name Address Information Phone Number Email User Information Sales Information Maintenance Delivery Failure Repair Date Descr
Please Follow EAVISION Official Social Media Channel: YouTube,Facebook,Twitter,LinkedIn,Instagram The contents of this manual and product specifications are subject to change without prior notice. Suzhou Eavision Robotic Technologies Co.,Ltd. Address: Unit1-A, No.3 Workshop, 28 Xiasheng Road, SIP, Suzhou, Jiangsu Province, China Website:www.eav.