Use Manual Tri-scale smart bluetooth scale DW-XM5000
Safety Instruction ＊ Do not disassemble the electronic scale by yourself. Please read this manual carefully before use. ＊ Please do not use the electronic scale in high temperature and humid places. ＊ Contains a lithium battery. Please do not dispose of used electronic scales . ＊ Do not hit the impact and press the electronic scale. ＊ Do not disassemble the electronic scale and place it in water or fire. ＊ Please place the scale on a stable flat table or floor.
Product spec 6 ① Display(OLED white display，128x64) ② Power button(click-on，press-off) ③ Zero button(clickzero,double clickClear accumulation） 5 ④ Speaker ⑤ Adjustment buttonx4 ⑥ charging interface 1 4 2 3
Display Instruction 1 2 3 4 ① Three recent weight information displays ② Weight stability indicator display ③ Current weight information display ④ Weight units show kilograms kg ⑤ Zero point symbol display ⑥ Cumulative symbol display ⑦ Cumulative weight display ⑧ Bluetooth connection display symbol（press3 seconds later show Bluetooth address） ⑨ Battery power symbol display 9 5 6 7 8
Operation Instruction 1、Open the scale like pic shows,put it on the stable table 2、clickbutton to turn on, and start weighing after the weight is zero. 3、After the weight is stable, the voice broadcasts will speak current weight information In the weighing mode, if the electronic scale is not weighted within 10 minutes, it will automatically shut down. In the weighing mode, if the electronic scale is not weighted within 3 minutes, it will enter the sleep mode.
Specification Model DM-XM5000 Open size Length 540mm，height 50mm Max 50kg/100kg Close size L*W*H303mm*66mm*50mm Verification scale value 0.1kg Battery Li 3.7V 2000/4000mAh Actual scale value 0.05kg Communication method Bluetooth 5.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
