Product Card

Table Of Contents

Remote control instructions

1. Transmitter button description

Key Function

ON/OFF: used to turn on or off the fan

Speed -: Used to reduce the fan speed, short press: reduce to the minimum speed according to a fixed

ratio. Long press: reduce to the minimum speed at a rate of 1%

Speed+: Used to increase the fan speed, short press: increase to the maximum speed according to a

fixed ratio. Long press: increase to the maximum speed at a rate of 1%

Transmitting indicator: when you press any button, it is always on

Charging indicator: the red light is always on when charging, the green light is always on when fully

charged

Speed mode:

Fixed speed ratio: 10%, 15%, 20%, 25%, 50%, 75%, 100%

Default speed ratio: 25% (initial speed at startup)

2. Pairing method of remote control and receiver

2.1: The transmitter has a built-in battery, without any settings.

2.2.1 Remote control pairing: After the receiver is connected to the battery, press the power switch, and

the green indicator light of the receiver is always on. Use the card pin to insert from the small hole of the

shell, after a short press, the green indicator light will turn on After the green indicator light is off, short

press any button of the transmitter. At this time, the blue indicator light of the receiver will flash three

times, and the green indicator light will be turned on.At this time, the remote control is successfully

paired.

2.2.2 Unpairing the remote control: When the power supply of the receiver is turned on, use the card pin

to insert from the small card of the housing, press and hold for 2S-3S, and after the orange indicator

flashes three times, cancel the currently paired transmitter.

PAGE 1
Remote control instructions 1. Transmitter button description Key Function ON/OFF: used to turn on or off the fan Speed -: Used to reduce the fan speed, short press: reduce to the minimum speed according to a fixed ratio. Long press: reduce to the minimum speed at a rate of 1% Speed+: Used to increase the fan speed, short press: increase to the maximum speed according to a fixed ratio.
PAGE 2
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.