UMI E-Motor USER GUIDE
Product Introduction UMI E-Motor is a type of electric propeller installed on the paddle board, kayak or other water sports products. UMI E-Motor works with a dedicated radio controller. User can control its RUN/STOP and speed on the paddle board or kayak by radio controller. Product Description 1.
charger adapter Connect the propeller battery to the charger via the charger adapter, then plug the charger into the power socket(220V) and charge it for about 1h and 30min. When the charger indicator turns green, the charging is completed. 2.
Firstly, connect the male and female connector of the propeller, turn on the radio controller, and then hold down the speed-up and speed-down buttons at the same time till the pairing indicator [6] turns green. Secondly, unplug the male and female connector of the propeller, and then re-install it. If the pairing indicator [6] shows blue, it means the pairing is completed.
. The product is only suitable for users between 16 and 60 years old. 6. Charge the battery every three months to prevent damage.4. Please do not disassemble, modify or violently operate this product. Incorrect use of the product may reduce the life of the product or damage it. 7. This product complies with part 15 of the FCC Rules.
