User's Manual

SUUNTO EON
QUICK GUIDE
en
1. Wake up the device by keeping any button
pressed.
1. GET STARTED
2. Set up the device. When ready, the device
goes to the default Surface mode.
2. CONNECT
1.
4. SET DIVE GAS(ES)
2.
3. SET DIVE SETTINGS
3. After updating and personalizing your
device, disconnect it when fully charged.
2. Download and install DM4 software.
PARTS
(1) Suunto EON
(2) Protective boot
(3) USB cable
(4) Bungee adapter
(1)
(4)
(2)
1. Connect and charge your device. Ensure
device is fully charged before first dive.
NAVIGATE WITHIN VIEWS
ENTER / BACK / EXIT
MENU
1. In Menu, select Gases.
2. Select the gas according to your dive plan.
Select New gas if your mix is not in the list.
NOTE: If a device software update is available, it is
dowloaded and installed automatically.
BATTERY LIFE
1. Keep middle button pressed to access Menu.
3. When settings are ready, keep middle button
pressed to go back and exit.
2. Scroll with upper button and select
Dive settings with middle button.
WARNING: Download and read
complete User Guide before diving
www.suunto.com/support
5. PAIR TANK POD
1. Install Tank POD and open tank valve.
3. Wait for green LED on Tank POD to flash.
2. Hold your device close to the Tank POD.
PROTO
www.movescount.com/dm4
www.movescount.com/dm4
2s
2s
Menu
Gases
Active gases
Air
Menu
Dive settings
Menu Dive settings
2s
16:30
Mon 20.9.
2s
16:30
Mon 20.9.
(3)
35h
= max dive time
Paired with current active gas
Pairing failed
Dive settings Dive modes Parameters
Dive enablersDevice settings Tank transmitters
Set gas
*
Dive alarms
Gases
General menu
Dive summary
Compass
Safety stop Set points **
Customization
About my EON
All dives
Previous dive
*
**
[Select gas to edit/remove > add gas] if Multiple gases is enabled. (XX)
If CCR is enabled.
My dives
19:36
depth, m
dive time
0
0’
Surface Mode
Dive Mode
48°
depth, m
dive time
0
0
75’
no deco
depth, m
dive time
18.2
12’
48°
depth, m
dive time
18.2
12’
19:36
depth, m
dive time
0
0’
NOTE: To use advanced features such as multigas or
helium, activate enablers through general settings.
See User Guide for more details.
FCC
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following
two conditions: (1) This device may
not cause harmful interference, and (2) this
device must accept any interference received,
including interference that may
cause undesired operation.
IC:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject
to the following two conditions: (1) this device
may not cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the
device.