EZ 4G ™ Home Signal Booster Kit User Guide
Thank you for your purchase of the EZ 4G. With this easy set-up guide, this booster can be installed in as little as 10 minutes, so you can enjoy a reliable consistent cellular connection. SureCall’s EZ 4G was specifically designed to eliminate frustrations over dropped calls, limited range and slow data rates by amplifying incoming and outgoing cellular signals in homes and offices. EZ 4G is a 5-band cellular booster that enhances 2G, 3G and 4G voice and data.
Table of Contents Table of Contents How it works ............................................................................................................................ 4 Package Contents........................................................................................................................ 5 Before Installation ....................................................................................................................... 6 Installation Overview................................
How It Works SureCall’s EZ 4G is a high-quality bidirectional signal booster that enhances cellular signals to areas that are prone to weak cellular coverage. How it works 1. An antenna built into the back of the booster communicates with the cell tower while it sits in your window. 2. The booster amplifies the existing cell signal and sends it to the tabletop antenna. 3. The tabletop antenna rebroadcasts the signal indoors to all mobile devices within range. 4.
Package Contents PACKAGE CONTENTS 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference: Serial #: ________________________________________________________________ Purchase Date: __________________________________________________________ 3. Keep the carton and packing material to store the product in case you need to return.
Before Installation BEFORE INSTALLATION 1. Make sure you have positioned the booster close enough to an existing electrical outlet. 2. Ensure adequate separation between the planned locations of the booster and inside antenna (at least 30 ft.). A separating wall between the booster and inside antenna is ideal. (See page 8). 3. Make sure you have sufficient cable length between the inside antenna location and booster location. The provided cable is 50 ft. Installation Overview Step 1.
Poor Good -60dB -50dB -70dB -80dB -90dB -100dB -110dB Installing Your Hardware Excellent Cell Tower • • Apple iPhones: Dial*3001# 12345#* and press Call. In the top-left corner, a number appears instead of bars. Android devices: download apps such as “Network Signal Info” in the Google Play store to measure signal strength. Search check real signal strength to find other cell signal measurement apps. • Internet: go to www.speedtest.net Step 2.
Installing Your Hardware 2. Power generated by booster 3. Reception from outside signal received and distributed by EZ 4G Important: • • This antenna should not be used near open fire or flame. Storage and transportation: Store and place in non-extreme room-temperature and dry environment Place the inside tabletop antenna in a central location where signal is needed and at least 30 ft. from the booster location.
Installing Your Hardware Step 4: Connect Power Once the booster and inside tabletop antenna are connected and in place, connect the power cord to the signal booster and plug into a power outlet. Note: If the Power LED does not turn ON or the Alert LEDs continue to flash, see ”Troubleshooting” on page 11. This booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster, cause personal injury, and void your warranty.
Troubleshooting LED INDICATORS LED Position LED Color LED Condition Indication Left Yellow Flashing Automatic Gain Control (AGC) is self-adjusting. This is part of normal operation. Left Red Flashing The booster is receiving too strong of a signal which could cause the booster to automatically turn off When this happens: Relocate the EZ 4G to a window location where the signal is weaker. Right Red Flashing Self-oscillation has been prevented.
Troubleshooting TROUBLESHOOTING In the event you encounter a problem, follow the suggestions below to resolve the issue. To resolve issues indicated by the LEDs, refer to “LED Indicators” on page 10. Problem Resolution Signal booster has no power Verify that the switch on the power supply is turned on and red LED is ON. Connect the power supply to an alternate power source. Be sure the power source is not controlled by a switch that can remove power from the outlet.
Specifications appareils avec porteuses muliples, on doit réduire la valeur nominale de 3,5 dB, surtout si le signal de sortie est retransmis et quil peut causer du brouillage aux utilisateurs de bandes adjacentes. Une telle réduction doit porter sur la puissance d’entrée our sur le gain, et ne doit pas se faire au moyen d’un atténuateur accordé À la sortie du dispositif. This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
Specifications GSM CDMA WCDMA Frequency (MHz) Bandwidth (MHz) Gain (dB) Meanpower (dBm) Gain (dB) Meanpower (dBm) Gain (dB) Meanpower (dBm) Uplink: 698-716 24.73 58.1 15.25 58.7 11.83 57.3 7.62 Uplink: 776-787 25.6 55.6 16.75 55.6 11.39 55.4 7.97 Uplink: 824-849 36.83 55.4 14.75 55.7 9.68 54.3 6.32 Uplink 1710-1755 72.3 65.5 17.89 64.9 17.63 63.8 15.22 Uplink: 1850-1915 76.8 65.2 21.32 65.5 20.24 65.2 17.5 Downlink: 728-746 33.33 56.8 -0.23 56.5 -7.
Warranty WARRANTY Three-Year Product Warranty SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
Warranty Limitations of Warranty, Damages and Liability EXCEPT AS EXPRESSLY SET FORTH HEREIN, THERE ARE NO WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER WARRANTIES, CONDITIONS, GUARANTEES, OR REPRESENTATIONS, WHETHER EXPRESSED OR IMPLIED, IN LAW OR IN FACT, ORAL OR IN WRITING. SURECALL AGGREGATE LIABILITY IN DAMAGES OR OTHERWISE SHALL NOT EXCEED THE PAYMENT, IF ANY, RECEIVED BY CELLPHONE-MATE, INC.
This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.