Fusion2Go™ 3.
Table of Contents Thank you for purchasing SureCall’s Fusion2Go 3.0 cell phone signal booster kit. Fusion2Go 3.0 provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: • Call: 1-888-365-6283 • Email: support@surecall.com How It Works.................................................................................................................................. 3 Package Contents..........
How It Works How It Works The SureCall Fusion2Go 3.0 is a high-quality bidirectional booster that enhances cellular signals for vehicles. The Fusion2Go 3.0 works with two antennas: • An inside antenna that communicates with your cell phone. • An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna.
Package Contents Package Contents 1. Unpack all package contents. For missing or damaged items, contact your reseller. 2. Turn over the signal booster and record the model and serial number for reference: Serial #: Purchase Date: 3. Keep the carton and packing material to store the product in case you need to return it. Your Fusion2Go 3.0 signal booster package includes the following items: • One SureCall Fusion2Go 3.
Installation Step 1: Mount Outside Antenna Place the magnetic-mount antenna on the top of your vehicle, preferably toward the back, maximizing the distance from planned location of the inside patch antenna. Ensure that the antenna has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna. Next, run the cable from the outside antenna across the car’s roof and into the car.
Installation Step 3. Place Booster and Connect Cables Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console. Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable.
Installation Step 4. Connect Power Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter1. The Power LED illuminates to show that the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal.
Troubleshooting LED Indicators In the event Red LEDs appear either solid or flashing, further separation between the booster and outside antenna is recommended. Note that the booster case may become warm during operation. This is normal. Troubleshooting Problem Resolution Signal booster has no power Verify that the Power LED is ON. Connect the power supply to an alternate power source. Verify that the power source is operational and the fuse is intact.
Specifications Specifications Product Fusion2Go 3.0 (US) Fusion2Go 3.0 CA (Canada) Uplink Frequency Range (MHz): 698‑716 / 776‑787 / 824‑849 / 1850‑1915 / 1710‑1755 (G Block Included) Downlink Frequency Range (MHz): 728‑746 / 746‑757 / 869‑894 / 1930‑1995 / 2110‑2155 (G Block Included) Input / Output Impedance: 50 Ω Maximum Gain: 50 dB Noise Figure: ≤ 5 dB VWSR: ≤ 2.
Kitting Information Antenna Kitting Information Gain Prod No. Description LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz / 2100 MHz Outdoor Antenna and Cable SC-202W and SC174-12.5 ft (12.5 ft) -3.16 dB -5.15 dB -5.65 dB -2.85 dB -3.34 dB / NG Outdoor Antenna and Cable SC200W and SC174-10 ft (10 ft) -2.3 dB -2.3 dB -2.3 dB -5.8 dB -3.98 / -5.96 dB Indoor Antenna and Cable SC110W and SC174-10 ft (10 ft) -2.7 dB -2.7 dB -3.2 dB -5.8 dB -3.98 / -5.
Kitting Information PreAGC PreAGC Pulse GSM 4.1 MHz AWGN Frequency (MHz) Input (dBm) Output (dBm) Gain (dB) Input (dBm) Output (dBm) Gain (dB) Uplink: 1710-1755 -17.9 27.0 44.9 -22.0 23.2 45.2 Uplink: 1850-1915 -21.0 25.1 46.1 -24.9 21.9 46.8 Uplink: 824-849 -18.6 29.0 47.6 -21.2 26.0 47.2 Uplink: 698-716 -18.9 28.3 47.2 -22.8 25.6 48.4 Uplink: 777-787 -22.4 26.6 49.0 -23.0 25.0 48.0 Downlink: 2110-2155 -46.6 -0.8 45.8 -51.5 -4.5 47.
Safety Information Safety Information This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-051.
Warranty Three-Year Product Warranty Register at www.SureCall.com SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.