Fusion2Go™ Max Vehicle Voice and 4G Data Signal Booster User Manual 04.12.
SureCall Fusion2Go Max User Guide Thank you for purchasing SureCall’s Fusion2Go Max cell phone signal booster kit. Fusion2Go Max provides enhanced voice, text and 4G data signal for any vehicle. If you have any questions during setup, please reach out to our US-based experienced support technicians: • • Call: 1-888-365-6283 Email: support@surecall.com Table of Contents How It Works............................................................................................................................
SureCall Fusion2Go Max User Guide How It Works The SureCall Fusion2Go Max is a high-quality bidirectional booster that enhances cellular signals for vehicles. The Fusion2Go Max works with two antennas: • An inside antenna that communicates with your cell phone. • An outside antenna that communicates with the cell tower. Signals sent from a cell tower are received by the outside antenna, amplified by the booster and then sent to your cell phone via the inside antenna.
SureCall Fusion2Go Max User Guide Package Contents SureCall offers many accessories to customize your signal booster kit to your specific needs. To learn more about these accessories or to replace damaged or missing items contact your reseller. For exchanges or returns, your reseller may request original packaging and basic product information.
SureCall Fusion2Go Max User Guide Next, run the cable from the outside antenna across the car’s roof and into the car. To hide and protect the antenna cable, carefully pull down the door seal, run cable underneath it and push the seal back into place. Run the cable to the inside of the vehicle near the planned location of the booster (under the seat of the vehicle, or in the front or middle console). Note: The outside antenna must not be collocated or operating with any other antenna or booster. Step 2.
SureCall Fusion2Go Max User Guide Step 3. Place Booster and Connect Cables Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console. Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Tighten the connections and wrap up any loose cable.
SureCall Fusion2Go Max User Guide Step 4. Connect Power Connect the power cord connector to the signal booster and insert the other end into your cigarette lighter adapter1. The Power LED illuminates to show that the signal booster is ready for use. The Alert LEDs flash 5 times to show the frequency band is operational. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal.
SureCall Fusion2Go Max User Guide LED Indicators Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed. Color Condition Indication Green Solid Indicates normal operation. Green Flashing Normal operation.
SureCall Fusion2Go Max User Guide Specifications Product Fusion2Go Max Uplink Frequency Range (MHz): 698‑716 / 776‑787 / 824‑849 / 1850‑1915 / 1710‑1755 (G Block Included) Downlink Frequency Range (MHz): 728‑746 / 746‑757 / 869‑894 / 1930‑1995 / 2110‑2155 (G Block Included) Input / Output Impedance: 50 Ω Maximum Gain: 50 dB Gain Adjustment: 20 dB (Automatic) Supported Standards: CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards Noise Figure: ≤ 7 dB VWSR: ≤ 2.
SureCall Fusion2Go Max User Guide Antenna Kitting Information Gain/Loss Component Notes Prod No. (Description) LTE-A LTE-V 800 MHz 1900 MHz 1700 MHz / 2100 MHz SC-328W -0.4 dBi 0.6 dBi 2.6 dBi 3.2 dBi 2.2 \ 3.2 dBi 0.1 dB 0.1 dB 0.1 dB 0.2 dB 0.2 dB Fusion2Go Max Kit Outdoor Antenna Outdoor Cable Indoor Antenna SC110W 1.1 dBi 1.1 dBi 1.1 dBi 3 dBi 3 \ 3 dBi Indoor Cable SC-174 (10 Ft) 3.8 dB 3.8 dB 4.3 dB 8.8 dB 6.98 \ 8.96 dB -0.4 dBi 0.6 dBi 2.6 dBi 3.2 dBi 2.2 \ 3.
SureCall Fusion2Go Max User Guide When used with any mobile device utilizing the 1710-1755 MHz band, the FCC limits booster equipment placement to a maximum of 10 meters above ground level. Installation of this equipment which does not comply with federal requirements may subject the owner to FCC enforcement action 15.105 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
SureCall Fusion2Go Max User Guide Consumer Guidelines This is a CONSUMER device BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
SureCall Fusion2Go Max User Guide Three-Year Product Warranty Register at www.SureCall.com/activate SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifications are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.
48346 Milmont Drive Fremont, California 94538, USA 888.365.6283 www.surecall.