Instruction Manual

CQL1688-B Bluetooth Speaker

Instruction Manual (Read before proceeding)

Power:

 Works on internal rechargeable Lithium battery. Please charge your speaker fully

before first use. To charge the battery :

Using a Micro USB cable (included), insert the jack into the ”Charging” hole on the

back of unit under the silicone cover , then plug the USB connecter in to the USB port

on a computer for charging.

 A red light will indicate the charging situation. When battery is full, the red light will

turn off automatically.

Bluetooth Speaker Operation

 Turn on the unit by pushing the switch to “ON” position. A Blue light will start blinking

to indicate the speaker is in paring mode and searching for your Bluetooth mobile

device.

 Open the Bluetooth function on your device and search the speaker named “XXXX”.

After selecting this speaker, your device will pair without a password. (If required,

enter the password “0000” to finalize the paring).The Blue light will begin to flash

slowly after pair is complete.

 Start playing music on your device. Keep your device within 33feet (10 meters) of

your speaker.

 Adjust the volume of your device to a comfortable level.

 Control play/pause, volume up/next track and volume down/previous track either on

your connected device or by the buttons on the fabric of the speaker.

 Turn off the unit when not in use.

Caution:

 This is not a toy. Please keep away from small children.

 Please keep away from water / heat.

 Low power may cause poor connection even no working of Bluetooth.

 Do not over charge the battery.

FCC Statement

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

PAGE 1
CQL1688-B Bluetooth Speaker Instruction Manual (Read before proceeding) Power:  Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into the ”Charging” hole on the  back of unit under the silicone cover , then plug the USB connecter in to the USB port on a computer for charging. A red light will indicate the charging situation.
PAGE 2
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver.