User's Manual

CQL1413-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a Micro USB cable (included), insert the jack into the ”Aux-in Charging” hole
located at the back of the unit and then plug the USB connecter into the USB port on
a computer for charging.
 A red light on the bottom will indicate the charging situation. When battery is full, the
red light will turn off automatically.
Bluetooth Speaker Operation
 Turn on the unit by pushing the switch on the bottom to position. A Blue light on
the bottom will start blinking to indicate the speaker is in paring mode and searching
for your Bluetooth mobile device.
 Open the Bluetooth function on your device and search the speaker named “SB-01”.
After selecting this speaker, your device will pair without a password. (If required,
enter the password “0000” to finalize the paring).The Blue light will begin to flashing
slower after pair is complete.
 Start playing music on your device. Keep your device within 33feet (10meter) of your
speaker.
 Adjust the volume of your device to a comfortable level.
 Turn off the unit when not in used.
Universal Speaker Operation
 For other music devices without Bluetooth, use the attached audio input cable. Insert
the Micro USB jack into the “Aux-in Charging” hole and the 3.5mm jack to the
earphone jack on your device.
 Turn on the unit by pushing the OFF switch on the bottom to “Aux” position and start
playing music.
Caution:
 This is not a toy. Please keep away from small children.
 Please keep away from water / heat.
 Low power may cause poor connection even no working of Bluetooth.
 Do not over charge the battery.




