User Manual

100 lbs.
(45 kg)
Profile:8-50CM
Full-featured
TV Bracket
Model:A3
Parts List Screw Package
①Bracket x1
②Paperboard
for punching x1
(4)Self-tapping
screw-A
(4)Plastic expansion
screw-B
(4)M8x25 -F
(4)Φ8x14x6
Higher spacer-G
(4)Φ8x14x11
Higher spacer-H
(4)Φ5 Washer-I (4)Φ6 Washer-J (1)Bubble level-K
(4)M5x25 -D (4)M6x25 -E
③Cable tie x3
④Hook x2
⑤Hook protectorx2
Installation tools
(please prepare before installation)
Metal Detector Screwdriver Pencil
Impact Drill 10MM Drill Bit Wrench
Confirm the distance of the hole on the back of your TV.
Please confirm your TV mounting
hole is within 400MM*400MM.
Step 1
Step 2
(4)M4x20 -C
MAX 400MM
MAX 400MM
Please confirm that your TV
weight does not exceed 45KG.
Warning: Please do not exceed
the maximum load-bearing
capacity, which may cause the
equipment falling.
What material is your wall
made of?
Is it a wooden wall?
Please read the instructions thoroughly and have a good
understanding of the entire installation process. Reading the
instructions for your TV to see whether there have any special
instructions for using the brackets or not.
WARNING: Avoid potential personal injury and property damage.
1. Please check your wall fastness, suitable for general wood and
brick, not plasterboard wall
2. The wall must be able to carry 5 times the weight (total of the TV
plus the bracket)
3. Our company does not bear the loss and damage caused by
improper use.
WARNING:
This product
contains very
small parts and is
fatal if swallowed.
Please check the
completeness of
the package
before installation.
If there are any
damaged or
missing parts,
please contact our
customer service
for your solution.
For 23”-55” TVs