XPass 2 INSTALLATION GUIDE Version 1.04 English EN 101.00.XP2-MDPB, XP2-GDPB, XP2-GKDPB V1.
$0/5&/54 4BGFUZJOTUSVDUJPOT 1SPEVDUTQFDJGJDBUJPOT *OTUSVDUJPOBMJDPOT %JNFOTJPOT *OUSPEVDUJPO $PNQPOFOUT /BNFBOEGVODUJPOPGFBDIQBSU 91 .
Safety instructions Please read this safety instructions before you use the product to prevent injury to yourself and others and to prevent property damage. The term ‘product’ in this manual refers to the product and any items provided with the product. 8BSOJOH: This symbol indicates situations that could result in death or severe injury. $BVUJPO: This symbol indicates situations that may result in moderate injury or property damage. /PUF: This symbol indicates notes or additional information.
BGFUZJOTUSVDUJPOT Caution Installation %POPUJOTUBMMUIFQSPEVDUVOEFSEJSFDUTVOMJHIUPS67MJHIU • This may result in product damage, malfunction, discoloration, or deformation. %POPUJOTUBMMUIFQPXFSTVQQMZDBCMFJOBMPDBUJPOXIFSFQFPQMFQBTTCZ • This may result in injury or product damage. %POPUJOTUBMMUIFQSPEVDUOFBSNBHOFUJDPCKFDUTTVDIBTBNBHOFU57NPOJUPSFTQFDJBMMZ$35PSTQFBLFS • The product may malfunction.
4BGFUZJOTUSVDUJPOT RTC battery Discard the battery according to the appropriate regional or international waste regulations. Discard the battery according to the appropriate regional or international waste regulations.
Introduction *OUSPEVDUJPO Components Device and Wall Bracket %FWJDFBOE8BMM#SBDLFU Device and Wall Bracket (XP2-MDPB) (XP2-GDPB) (XP2-GKDPB) PVC Anchor x2 Fixing Screw x2 Bracket Fixing Screw (Star Shaped) 132.2 83.5 39.8 XPD2-M XP2-M Diode XPass 2 Drilling Template Shrink Tube XPass 2 XPass 2 MDPB 201.00.XP2 V1.02A Ŷ UHVLVWRU XPass 2 XPass 2 GDPB 201.00.XP2 V1.02A XPass 2 GKDPB 201.00.XP2 V1.
*OUSPEVDUJPO Name and function of each part LED Indicator RF card and mobile access card authentication unit Keypad Reset Button Cable Name Description Indicates the operational status of the device with the color of the LED.
*OUSPEVDUJPO Only the XP2-GKDPB model supports the keypad. Cables This document describes cable information based on the shape of the XP2-MDPB model. The same cable configuration is also used for XP2-GDPB and XP2-GKDPB models.
Installation Fixing the bracket and the product 1 Determine the correct position to install the bracket using the provided drilling template. Fix the bracket firmly using fixing screws through the bracket to the position where XPass 2 will be installed. • If installing XPass 2 on a concrete wall, drill holes, insert PVC anchors, and fix them with fixing screws. • To avoid RF interference, a minimum separation distance must be maintained. 91 .
*OTUBMMBUJPO 2 Install XPass 2 onto the fixed bracket. 3 Assemble XPass 2 with the bracket by rotating the product fixing screw. • When assembling the product with the bracket, you can use the included bracket fixing screw(Star Shaped) instead of the product fixing screw for enhanced security.
*OTUBMMBUJPO Power supply connection 21 - PWR +VDC 22 - PWR GND Red Black (White stripe) DC power XPass 2 • Use the IEC/EN 62368-1 approved power adaptor that supports higher power consumption than the product. If you wish to connect and use another device to the power supply adaptor, you should use an adaptor with a current capacity which is the same or larger than the total power consumption required for the terminal and another device.
*OTUBMMBUJPO -"/DPOOFDUJPODPOOFDUJOHUPB1$EJSFDUMZ 91BTT IBTBOBVUPNBUJD.%*.
*OTUBMMBUJPO Relay connection 'BJM4BGF-PDL *OPSEFSUPVTFUIF'BJM4BGF-PDLDPOOFDU/$SFMBZBTTIPXOJOUIFGJHVSFCFMPX5IFSFJTOPSNBMMZBDVSSFOUGMPXJOH UISPVHIUIFSFMBZGPSUIF'BJM4BGF-PDL8IFOUIFSFMBZJTBDUJWBUFECMPDLJOHUIFDVSSFOUGMPXUIFEPPSXJMMPQFO*GUIF QPXFSTVQQMZUPUIFQSPEVDUJTDVUPGGEVFUPBQPXFSGBJMVSFPSBOFYUFSOBMGBDUPSUIFEPPSXJMMPQFO 19 - RLY COM 20 - RLY NC Green (White stripe) Orange (White stripe) 19 20 Dead bolt / Door strike XPass 2 DC
*OTUBMMBUJPO 'BJM4FDVSF-PDL *OPSEFSUPVTFUIF'BJM4FDVSF-PDLDPOOFDU/0SFMBZBTTIPXOJOUIFGJHVSFCFMPX5IFSFJTOPSNBMMZOPDVSSFOU GMPXJOHUISPVHIUIFSFMBZGPSUIF'BJM4FDVSF-PDL8IFOUIFDVSSFOUGMPXJTBDUJWBUFECZUIFSFMBZUIFEPPSXJMMPQFO*G UIFQPXFSTVQQMZUPUIFQSPEVDUJTDVUPGGEVFUPBQPXFSGBJMVSFPSBOFYUFSOBMGBDUPSUIFEPPSXJMMMPDL 18 - RLY NO 19 - RLY COM Gray (White stripe) Green (White stripe) 18 19 Dead bolt / Door strike DC Power XPass 2 • Install a d
*OTUBMMBUJPO Connecting as a standalone 91BTT DBOCFDPOOFDUFEUPUIFEPPSMPDLEPPSCVUUPOBOEEPPSTFOTPSEJSFDUMZXJUIPVUDPOOFDUJOHBTFQBSBUF*0 EFWJDF Hub XPass 2 PC Door button Fail Secure Lock or Fail Safe Lock Dead bolt / Door strike Relay connection 18 - RLY NO 19 - RLY COM 20 - RLY NC DC Power Gray (White stripe) Green (White stripe) Orange (White stripe) Power DC Power Door sensor TTL connection 15 - TTL IN0 16 - TTL IN1 17 - TTL GND Purple B
*OTUBMMBUJPO Connecting to Secure I/O 2 4FDVSF*0 JTBO*0EFWJDFDBOCFDPOOFDUFEUP91BTT XJUIUIF34 DBCMF4FDVSJUZDBOCFNBJOUBJOFEFWFOJGUIF DPOOFDUJPOCFUXFFO91BTT BOE4FDVSF*0 IBTCFFOMPTUPSUIFQPXFSTVQQMZUP#JP&OUSZ8 IBTCFFOTIVUPGGEVF UPFYUFSOBMGBDUPST • 6TFUIF34 DBCMFXJUI"8( UXJTUFEQBJSBOEMFTTUIBO LNJOMFOHUI • *GDPOOFDUJOHXJUIB34 EBJTZDIBJODPOOFDUUIFUFSNJOBUJPOSFTJTUPS ĒUPCPUIFOETPGUIFEBJTZDIBJO DPOOFDUJPO*
*OTUBMMBUJPO Wiegand connection 6TFBTB8JFHBOEJOQVUPVUQVUEFWJDF 12 - WG GND 13 - WG D1 14 - WG D0 Black White Green RFID reader / Control device XPass 2 Resetting Network Settings 1 2 3 Turn the power on. 4 5 Change the TCP/IP address or RS-485 information. Press and hold the reset button on the rear of device until the device restart automatically. Connect the device with default values.
Product specifications Feature RF Option $SFEFOUJBM RF read range** Specifications XP2-MDPB XP2-GDPB 125 kHz EM & 13.
1SPEVDUTQFDJGJDBUJPOT %JNFOTJPOT 6OJUNN 5IFUPMFSBODFJTp NN 91 .
FCC compliance information Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Appendices Disclaimers • The right to use is acknowledged only for Suprema products included in the terms and conditions of use or sale for such products guaranteed by Suprema. No license, express or implied, by estoppel or otherwise, to any intellectual property is granted by this document.
"QQFOEJDFT Open Source License • The software of this product is based on "Linux Kernel 3.x", which is licensed under GPL. As for GPL, please refer to the GNU General Public License in this manual. • This product uses the "glibc" library, which is licensed under LGPL. As for LGPL, please refer to the GNU Lesser General Public License in this manual. • This product uses the "QT" library, which is licensed under LGPL. As for LGPL, please refer to the GNU Lesser General Public License in this manual.
"QQFOEJDFT TERMS AND CONDITIONS 0. Definitions. “This License” refers to version 3 of the GNU General Public License. “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks. “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
"QQFOEJDFT 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
"QQFOEJDFT 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
"QQFOEJDFT 7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.
"QQFOEJDFT 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License.
"QQFOEJDFT A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License.
"QQFOEJDFT 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
"QQFOEJDFT b) Accompany the object code with a copy of the GNU GPL and this license document. 4. Combined Works.
"QQFOEJDFT OpenSSL License Copyright (c) 1998-2017 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
"QQFOEJDFT include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Suprema Inc. 17F Parkview Tower, 248, Jeongjail-ro, Bundang-gu, Seongnam-si, Gyeonggi-do, 13554, Rep. of KOREA Tel: +82 31 783 4502 | Fax: +82 31 783 4503 | Inquiry: sales_sys@supremainc.com For more information about Suprema’s global branch offices, visit the webpage below by scanning the QR code. https://supremainc.com/en/about/global-office.asp © 2022 Suprema Inc. Suprema and identifying product names and numbers herein are registered trade marks of Suprema, Inc.
