User's Manual

ManualsBrandsSuprema ManualsElectronicsFINGERPRINT SYSTEM

Product Dimension

Metal BracketFront Side

160

150

135

(unit : mm)

160

Summary of content (22 pages)

PAGE 2
Cables and Connectors Power and RS485 TCP/IP PIN 1 2 3 4 5 PIN DESCRIPTION POWER +12V POWER GND RS -485 GND RS -485 TRX+ RS -485 TRX- WIRE RED BLACK GRAY BLUE YELLOW PIN PIN DESCRIPTION WIRE RJ45 PIN 1 2 3 4 TX + TX RX + RX - YELLOW GREEN RED BLACK 6 3 2 1 Wiegand output PIN 1 2 3 PIN DESCRIPTION WIEGAND DATA0 WIEGAND DATA1 WIEGAND GND WIRE GREEN WHITE BLACK PIN 1 2 3 4 5 6 7 PIN DESCRIPTION SW1 INPUT SW1 GND SW2 INPUT SW2 GND RELAY NORMAL CLOSE RELAY COMMON RELAY NORMAL OPEN WIRE YELLOW
PAGE 3
Installation of Wall-mount Bracket n Fix wall mount bracket on a wall using wall mounting screws Hook BioEntry Plus on the wall mount bracket n Wall mounting screws n Fix BioStation and wall mounting bracket using a star shape screw. Star-shaped screw Star-shaped wrench 14 ⒸCopyright 2007 Suprema Inc.
PAGE 4
Power Connection n Recommended power supply l 12V ± 10%, at least 1500mA. l Comply with standard IEC/EN 60950-1. l To share the power with other devices, use a power supply with higher current ratings. 15 ⒸCopyright 2007 Suprema Inc.
PAGE 6
Ethernet Connection (Direct connection with PC) n To connect BioEntry Plus with a PC directly, connect both devices with a straight CAT-5 cable. As the BioEntry Plus supports auto MDI/MDIX feature, it is not necessary to use a crossover type cable. 17 ⒸCopyright 2007 Suprema Inc.
PAGE 8
RS485 Connection for Secure I/O n Max number of devices l Maximum numbers of devices in an RS485 loop are two(2) devices (BioStation or BioEntry Plus) and four(4) Secure I/Os 19 ⒸCopyright 2007 Suprema Inc.
PAGE 17
Installation Reference 3 – Network Door Zone 1 (Anti passback) RS485 BioStation RS485 BioEntry Plus BioEntry Plus Secure I/O LAN PC Server Enroll Scanner PC Client BioStation Secure I/O BioEntry Plus Exit Button RS485 Door Zone 2 (Anti passback) PC Client 28 ⒸCopyright 2007 Suprema Inc.
PAGE 18
Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 Use regulated DC power adaptor only Power Voltage (V) Current (mA) - 250 Switch Input VIH (V) - TBD - VIL (V) - TBD Pull-up resistance (Ω) - 4.7k - VOH (V) - 5 - VOL (V) - 0.8 - Pull-up resistance (Ω) - 4.7k - Switching capacity (A) - - 1 0.3 Switching power (resistive) - - 30W 37.5VA DC AC Switching voltage (V) - - 110 125 DC AC The input ports are pulled up with 4.
PAGE 19
Troubleshooting n Fingerprint can not be read well or it takes too long. l l l n Fingerprint is entered but authorization keeps failing. l l n Check whether the user is restricted by door zone or time zone. Inquire of administrator whether the enrolled fingerprint has been deleted frin the device for some reason. Authorized but door is not opened.
PAGE 20
Device cleaning n n n Wipe out machine surface with dry towel or cloth. In case there is dust or impurities on the sensor of the BioStation, wipe off the surface with dry towel. Note that if the sensor is cleaned by detergent, benzene or thinner, surface is damaged and fingerprint can’t be entered. 31 ⒸCopyright 2007 Suprema Inc.
PAGE 21
FCC Rules Caution Warning Information to User l Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. l This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 22
Suprema Inc. 16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 Korea E-mail : support@supremainc.com Website : www.supremainc.com Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.