IP based Fingerprint Access Control Installation Guide (ver 1.0) www.supremainc.
Contents Safety precautions 3 Basics of fingerprint recognition 5 How to place a finger 6 Product Contents 8 Front Side 10 Bottom and Back Side 11 Product Dimension 12 Cables and Connectors 13 Installation of Wall-mount Bracket 14 Power Connection 15 Ethernet Connection 16 RS485 Connection 18 Relay Connection 20 Digital Input Connection 23 Wiegand Output 25 Installation Reference 26 Electrical Specification 29 Troubleshooting 30 Device cleaning 31 FCC Rules 32 2 ⒸCop
Safety precautions n The list below is to keep user’s safety and prevent any loss. Please read carefully before use. Do not install the device in a place subject to direct sun light, humidity, dust or soot. Do not place a magnet near the pr oduct. Magnetic objects such as magnet, CRT, TV, monitor or spe aker may damage the device. Do not place the device next to heating equipments. Be careful not to let liquid like water, drinks or chemicals leak inside the device.
Safety precautions n The list below is to keep user’s safety and prevent any loss. Please read carefully before use. Do not drop the device. Do not damage the device. Do not disassemble, repair or alter the device. Do not let children touch the device without supervision. Do not use the device for any other purpose than specified. Contact your nearest dealer in case of a trouble or problem. 4 ⒸCopyright 2007 Suprema Inc.
Basics of fingerprint recognition n What is fingerprint recognition? l l n Process of fingerprint recognition l l l n Fingerprint is an individual’s own biometric information and does not change throughout his/her life. Fingerprint recognition is a technology that verifies or identifies an individual using such fingerprint information. Free from the risk of theft or loss, fingerprint recognition technology is being widely used in security systems replacing PIN or cards.
How to place a finger Suprema’s fingerprint products show an outstanding recognition performance regardless of the user’s fingerprint skin condition or the way of fingerprint positioning. However, following tips are recommended to get more optimal fingerprint recognition performance. n Select a finger to enroll l l n It is recommended to use an index finger or a middle finger. Thumb, ring or little finger is relatively more difficult to place in a correct position.
How to place a finger n Tips for different fingerprint conditions l Suprema’s fingerprint products are designed to scan fingerprint smoothly regardless of the conditions of a finger skin. However, in case a fingerprint is not read well on the sensor, please refer to the followings tips. § If a finger is stained with sweat or water, scan after wiping moisture off. § If a finger is covered with dust or impurities, scan after wiping them off.
Product Contents n Basic Contents BioEntry Plus Wall-mounting metal bracket Wall mounting screws – 2 ea Star-shaped screws Star-shaped small wrench Software CD 3 pin, 4 pin, 5 pin, 7 pin cables – each 1 ea 8 ⒸCopyright 2007 Suprema Inc.
Product Contents n Optional accessories Secure I/O 12V power adaptor Plastic stand USB fingerprint scanner for enrollment on PC 9 ⒸCopyright 2007 Suprema Inc.
Front Side n Front LED Status per Color RF card reading part Place an RF card over the picture LED Display current status using seven different colors Fingerprint sensing part Place a finger on a sensor surface l Green : Authorization Success l Red : Authorization Fail l Pink : On Processing l Flicker Blue/Sky-Blue Color per 2sec : Normal l Flicker Red/Pink Color per 2sec : Locked l Flicker Blue/Red Color per 2sec : Initialized Time due to the Internal Battery Discharge l Flicker Blue/Yell