IP based Fingerprint Access Control Installation Guide (ver 1.0) www.supremainc.
Contents Safety precautions 3 Basics of fingerprint recognition 5 How to place a finger 6 Product Contents 8 Front Side 10 Bottom and Back Side 11 Product Dimension 12 Cables and Connectors 13 Installation of Wall-mount Bracket 14 Power Connection 15 Ethernet Connection 16 RS485 Connection 18 Relay Connection 20 Digital Input Connection 23 Wiegand Output 25 Installation Reference 26 Electrical Specification 29 General Specification 30 Troubleshooting 31 Device cleaning
Safety precautions The list below is to keep user’s safety and prevent any loss. Please read carefully before use. Do not install the device in a place subject to direct sun light, humidity, dust or soot. Do not place a magnet near the pr oduct. Magnetic objects such as magnet, CRT, TV, monitor or spe aker may damage the device. Do not place the device next to heating equipments. Be careful not to let liquid like water, drinks or chemicals leak inside the device.
Safety precautions The list below is to keep user’s safety and prevent any loss. Please read carefully before use. Do not drop the device. Do not damage the device. Do not disassemble, repair or alter the device. Do not let children touch the device without supervision. Do not use the device for any other purpose than specified. Contact your nearest dealer in case of a trouble or problem. 4 Copyright 2007 Suprema Inc.
Basics of fingerprint recognition What is fingerprint recognition? Process of fingerprint recognition Fingerprint is an individual’s own biometric information and does not change throughout his/her life. Fingerprint recognition is a technology that verifies or identifies an individual using such fingerprint information. Free from the risk of theft or loss, fingerprint recognition technology is being widely used in security systems replacing PIN or cards.
How to place a finger Suprema’s fingerprint products show an outstanding recognition performance regardless of the user’s fingerprint skin condition or the way of fingerprint positioning. However, following tips are recommended to get more optimal fingerprint recognition performance. Select a finger to enroll It is recommended to use an index finger or a middle finger. Thumb, ring or little finger is relatively more difficult to place in a correct position.
How to place a finger Tips for different fingerprint conditions Suprema’s fingerprint products are designed to scan fingerprint smoothly regardless of the conditions of a finger skin. However, in case a fingerprint is not read well on the sensor, please refer to the followings tips. If a finger is stained with sweat or water, scan after wiping moisture off. If a finger is covered with dust or impurities, scan after wiping them off.
Product Contents Basic Contents BioEntry Plus Wall-mounting metal bracket Wall mounting screws – 2 ea Star-shaped screws Star-shaped small wrench Software CD 3 pin, 4 pin, 5 pin, 7 pin cables – each 1 ea 8 Copyright 2007 Suprema Inc.
Product Contents Optional accessories Secure I/O 12V power adaptor Plastic stand USB fingerprint scanner for enrollment on PC 9 Copyright 2007 Suprema Inc.
Front Side Front LED Status per Color RF card reading part Place an RF card over the picture LED Display current status using seven different colors Fingerprint sensing part Place a finger on a sensor surface Green : Authorization Success Red : Authorization Fail Pink : On Processing Flicker Blue/Sky-Blue Color per 2sec : Normal Flicker Red/Pink Color per 2sec : Locked Flicker Blue/Red Color per 2sec : Initialized Time due to the Internal Battery Discharge Flicker Blue/Yell
Bottom and Back Side Bottom Star-shaped screw hole for fixing a body to a metal bracket Back 3 pin connector – wiegand output 5 pin connector – power and RS485 4 pin connector – ethernet (TCP/IP) 7 pin connector – digital input and relay output DIP switch – RS485 termination setting (Refer to “RS485 Connection” pages for details) 11 Copyright 2007 Suprema Inc.
Product Dimension 50 160 160 Front 40 37 150 Side 135 Metal Bracket (unit : mm) 12 Copyright 2007 Suprema Inc.
Cables and Connectors Power and RS485 PIN 1 2 3 4 5 PIN DESCRIPTION POWER +12V POWER GND RS -485 GND RS -485 TRX+ RS -485 TRX- WIRE RED BLACK GRAY BLUE YELLOW TCP/IP PIN PIN DESCRIPTION WIRE RJ45 PIN 1 2 3 4 TX + TX RX + RX - YELLOW GREEN RED BLACK 6 3 2 1 Wiegand output PIN 1 2 3 PIN DESCRIPTION WIEGAND DATA0 WIEGAND DATA1 WIEGAND GND WIRE GREEN WHITE BLACK PIN 1 2 3 4 5 6 7 PIN DESCRIPTION SW1 INPUT SW1 GND SW2 INPUT SW2 GND RELAY NORMAL CLOSE RELAY COMMON RELAY NORMAL OPEN WIRE YELLOW B
Installation of Wall-mount Bracket Fix wall mount bracket on a wall using wall mounting screws Hook BioEntry Plus on the wall mount bracket Wall mounting screws Fix BioStation and wall mounting bracket using a star shape screw. Star-shaped screw Star-shaped wrench 14 Copyright 2007 Suprema Inc.
Power Connection Recommended power supply 12V 10%, at least 1500mA. Comply with standard IEC/EN 60950-1. To share the power with other devices, use a power supply with higher current ratings. 15 Copyright 2007 Suprema Inc.
Ethernet Connection 16 Copyright 2007 Suprema Inc.
Ethernet Connection (Direct connection with PC) To connect BioEntry Plus with a PC directly, connect both devices with a straight CAT-5 cable. As the BioEntry Plus supports auto MDI/MDIX feature, it is not necessary to use a crossover type cable. 17 Copyright 2007 Suprema Inc.
RS485 Connection for Host Communication 18 Copyright 2007 Suprema Inc.
RS485 Connection for Secure I/O Max number of devices Maximum numbers of devices in an RS485 loop are two(2) devices (BioStation or BioEntry Plus) and four(4) Secure I/Os 19 Copyright 2007 Suprema Inc.
Relay Connection – Fail safe lock 20 Copyright 2007 Suprema Inc.
Relay Connection – Fail secure lock 21 Copyright 2007 Suprema Inc.
Relay Connection - Automatic door 22 Copyright 2007 Suprema Inc.
Digital Input Connection (RTE, Door sensor) 23 Copyright 2007 Suprema Inc.
Digital Input Connection (Alarm, Emergency sw) 24 Copyright 2007 Suprema Inc.
Wiegand Output 25 Copyright 2007 Suprema Inc.
Installation Reference 1 - Stand alone Door Sensor Door Lock Exit Button BioEntry Plus LAN PC Enroll Scanner 26 Copyright 2007 Suprema Inc.
Installation Reference 2 – Secure RS485 Door Sensor Door Lock Exit Button Secure I/O BioEntry Plus LAN PC Enroll Scanner 27 Copyright 2007 Suprema Inc.
Installation Reference 3 – Network Door Zone 1 (Anti passback) RS485 BioStation RS485 BioEntry Plus BioEntry Plus Secure I/O LAN PC Server Enroll Scanner PC Client BioStation Secure I/O BioEntry Plus Exit Button RS485 Door Zone 2 (Anti passback) PC Client 28 Copyright 2007 Suprema Inc.
Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 Use regulated DC power adaptor only Power Voltage (V) Current (mA) - 250 Switch Input VIH (V) - TBD - VIL (V) - TBD Pull-up resistance (Ω) - 4.7k - VOH (V) - 5 - VOL (V) - 0.8 - Pull-up resistance (Ω) - 4.7k - Switching capacity (A) - - 1 0.3 Switching power (resistive) - - 30W 37.5VA DC AC Switching voltage (V) - - 110 125 DC AC The input ports are pulled up with 4.
General Specification Item Specification CPU 400MHz DSP Fingerprint Sensor OC Model : Optical Sensor TC Model : Capacitive Sensor IN/OUT Relay Out x 1, Switch Input x 2, Wiegand In/Out x 1 RS-485 x 1, Ethernet x 1 Power Input Rate DC12V, Max 250mA Support Cards BioEntey Plus OC/TC Model (BEPL-OC/TC) : - 125KHz EM4100 Compatible Card Read BioEntry Plus HID OC/TC Model (BEPH-OC/TC) - 125KHz HID Prox Compatible Card Read BioEntry Plus Mifare OC/TC Model (BEPM-OC/TC) - 13.
Troubleshooting Fingerprint can not be read well or it takes too long. Fingerprint is entered but authorization keeps failing. Check whether the user is restricted by door zone or time zone. Inquire of administrator whether the enrolled fingerprint has been deleted frin the device for some reason. Authorized but door is not opened.
Device cleaning Wipe out machine surface with dry towel or cloth. In case there is dust or impurities on the sensor of the BioStation, wipe off the surface with dry towel. Note that if the sensor is cleaned by detergent, benzene or thinner, surface is damaged and fingerprint can’t be entered. 32 Copyright 2007 Suprema Inc.
FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 34 Copyright 2007 Suprema Inc.
Suprema Inc. 16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 Korea E-mail : support@supremainc.com Website : www.supremainc.com Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.
