User Manual

ManualsBrandsSupermicro ManualsComputers & AccessoriesSupermicro Dual LGA2011, Intel C612, DDR4, SATA3 & USB3.0, A & 2GbE, ATX Server Motherboard X10DAL-I-O

UPERMICR

ContaCt InformatIon

MNL-1701 -QRG-10a

• Website: www.supermicro.com

• General Information: marketing@supermicro.com

• Tech Support: support@supermicro.com

• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008

Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time

of printing; however, it is not guaranteed.

PaCkage Contents

X10DaL-I

QuICk referenCe guIDe (rev 1.0a)

• One (1) Supermicro Motherboard

• Six (6) SATA Cables (CBL-0044L)

• One (1) I/O Shield (MCP-260-00077-0N)

• One (1) Quick Reference Guide (MNL-1701-QRG)

for your system to work ProPerLy, PLease DownLoaD aPProPrIate

DrIvers/Images/user's manuaL from the LInks beLow:

• Manuals: http://www.supermicro.com/support/manuals/

• Drivers & Utilities: ftp://ftp.supermicro.com/

• Safety:

http://www.supermicro.com/about/policies/safety_information.cfm

BT1

JPCIE3

LEDPWR

I-SGPIO2

LE6

JBT1

BIOS

LICENSE

JPI2C1

JTBT1

J24

JPWR1

JPWR2

JF1

JD1

JHD_AC1

JSPDIF_OUT

JSPDIF_IN

J21

JL1

JSD1

JSD2

JSTBY1

JTPM1

JVRM2

JVRM1

JPAC1

JPL2

JPL1

JPUSB1

JBR1

JI2C2

JPME2

JI2C1

J23

SP1

FAN3

FANA

FAN6

FAN4

FAN2

FAN1

MAC CODE

X10DAL-i

BAR CODE

AUDIO FP

HD AUDIO

(3.0)

USB5/6

(3.0)

USB7/8(3.0)

USB1/2

USB0

USB3/4

S-SATA2

S-SATA0

S-SATA1

S-SATA3

I-SATA5

CPU1 SLOT1 PCI-E 3.0 X8 (IN X16)

I-SATA4

CPU2 SLOT2 PCI-E 3.0 X4 (IN X8)

I-SATA3

I-SATA2

I-SATA1

CPU1 SLOT3 PCI-E 3.0 X16

I-SATA0

CPU1 SLOT5 PCI-E 3.0 X16

P2-DIMME1

P1-DIMMC1

P2-DIMMF1

P1-DIMMD1

P2-DIMMH1

P1-DIMMB1

P1-DIMMA1

LAN2

P2-DIMMG1

LAN1

COM1

I-SGPIO1

S-SGPIO

PCH SLOT6 PCI-E 2.0 X4 (IN X8)

JWD1

Rev. 1.02

FAN5

CPU1

CPU2

Battery

PCH

BIOS

1. Rear USB 3.0 Port 3

2. Rear USB 3.0 Port 4

3. Gigabit LAN Port 1

4. Rear USB 3.0 Port 5

5. Rear USB 3.0 Port 6

6. Gigabit LAN Port 2

7. SPDIF_Out

8. Surround_Out

9. CEN/LFE_Out

10. Mic_In

11. Line-Out

12. Line_In

Jumper Description Default Setting

JBT1 Clear CMOS See Chapter 2

C1/JI

C2 SMBus to PCI-E Slots Pins 2-3 (Disabled)

JPAC1 Audio Enable Pins 1-2 (Enabled)

JPL1/JPL2 GLAN1/GLAN2 Enable/Disable Pins 1-2 (Enabled)

JPME2 ME (Manufacture) Mode Select Pins 1-2 (Normal)

JPUSB1 USB 0/1 Wake-up Enable Pins 1-2 (Enabled)

JWD1 Watch Dog Pins 1-2 (Reset)

J21 LAN Controller EEPROM update Open (Disabled)

Connectors Description

Audio_FP Audio connector for front access

HD Audio 5.1 HD (6-channel High-Denition) + SPDIF audio connector

BT1 Onboard CMOS battery (See Chapter 3 for Used Battery Disposal)

COM1 Serial port header

CPU1 Slot1 PCI-E 3.0 x 8 in 16 slot

CPU2 Slot2 PCI-E 3.0 x 4 in 8 slot (This slot is available when CPU2 is installed.)

CPU1Slot3/Slot5 PCI-E 3.0 x16 slots

PCH Slot6 PCI-E 2.0 x4 in x8 slot (See the note below for Thunderbolt AOC support.)

FAN1-6, FANA CPU/System fan headers

J24 ATX 24-pin power connector

JD1 Speaker/Power LED indicator

JF1 Front panel control header

JL1 Chassis intrusion header

JPI2C1 Power supply SMBbus I

C header

JPWR1/JPWR2 12V 8-Pin Power Connectors

JSD1/JSD2 SATA DOM (Device_On_Module) power Connection headers 1/2

JSPDIF_In SPDIF_(Sony/Philips Digital Interface)_In/Out header

JSPDIF_Out SPDIF_(Sony/Philips Digital Interface)_Out header

JSTBY1 Standby power header

JTBT1 GPIO (General-Purpose I/O) header for Thunderbolt add-on card (See the note on page 1-5

for Thunderbolt AOC support.)

JTPM1 TPM (Trusted Platform Module)/Port 80 header

LAN1/LAN2 Gigabit Ethernet ports 1/2

I-SATA0-5 Serial_Link ATA (SATA 3.0) connections 0-5 supported by Intel PCH (I-SATA4/5 support

Supermicro SuperDOMs [Devices-on-Module] with power pins built-in)

S-SATA 0-3 Serial_Link ATA (SATA 3.0) connections 0-3 supported by Intel SCU

SP1 Onboard buzzer (internal speaker)

I-SGPIO 1/2,

S-SGPIO

Serial-Link General_Purpose IO (SGPIO) headers (I-SGPIO 1: I-SATA0-3, I-SGPIO 2: I-

SATA4/5, S-GPIO: S-SATA0-3)

USB 3/4 (3.0) Rear USB 3.0 ports 3/4 on the IO backpanel

USB 1/2 (2.0) Front USB 2.0 ports 1/2 for front access

USB 5/6 (3.0) Rear USB 3.0 ports 5/6 on the IO backpanel

USB 7/8 (3.0) Front-accessible USB 3.0 connections 7/8

USB 0 (2.0) Type A USB 2.0 USB connection header

LED Description State

LE6 Power Good LED Green: All onboard power VRMs Normal

LEDPWR Power LED Solid On: Power On, Blinking: Suspend to RAM

LED Indicators

Jumpers

Motherboard Layout and Features

Connectors

DIMM Memory Installation

Jumpers and Connectors

Back Panel I/O Connectors

Memory Support

CPU Installation

Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as the drawings shown in this guide.

Note: Refer to Chapter 1 of the user manual for detailed information on jumpers, connectors, and LED

indicators.

Note: Refer to Chapter 2 of the user manual for detailed information on memory support and CPU/

motherboard installation instructions.

= mounting hole

Heatsink Installation

Front Panel Control (JF1)

CPU Support

Release Tabs

Notches

CPU Keys

Socket Keys

CPU Pin1

Dual Intel

E5-2600v3/v4 Series Processors (Socket R3-LGA 2011); each pro-

cessor supports dual full-width Intel QuickPath Interconnect (QPI) links (of up

to 9.6 GT/s one direction per QPI)

This motherboard supports up to 1024 GB of Load Reduced (LRDIMM) and up

to 256 GB of Registered (RDIMM) DDR4 (288-pin) ECC 2400/2133/1866/1600

MHz memory modules in 8 slots. Memory speed support is dependent on the

CPUs installed in the motherboard. For the latest memory updates, please refer

to our website at http://www.supermicro.com/products/motherboard.

1. Rear USB 3.0 Port 0

2. Rear USB 3.0 Port 1

3. Gigabit LAN Port 1

4. Rear USB 3.0 Port 6

5. Rear USB 3.0 Port 7

6. Gigabit LAN Port 2

7. SPDIF_Out

8. Surround_Out

9. CEN/LFE_Out

10. Mic_In

11. Line-Out

12. Line_In

Install the screws

in the sequence

as shown.

Screw#2

Motherboard

Screw#1

Screw#3

Power Button

OH/Fan Fail/

PWR Fail LED)

NIC1 Link LED

Reset Button

Power Fail LED

HDD LED

FP PWRLED

Reset

PWR

3.3 V

UID Switch

UID LED

Ground

1920

3.3V

Ground

NMI

NIC2 Link LED

NIC2 Activity LED

NIC1 Activity LED

Type

Ranks Per

DIMM

and

Data

Width

DIMM Capacity

(GB)

Speed (MT/s);

Voltage (V);

Slot Per Channel

(SPC) and DIMM Per

Channel (DPC)

1 Slot Per Channel

1DPC

4Gb

8Gb

1.2V

RDIMM

SRx4

8GB

16GB

2133

RDIMM

SRx8

4GB

8GB

2133

RDIMM

DRx8

8GB

16GB

2133

RDIMM

DRx4

16GB

32GB

2133

LRDIMM

QRx4

32GB

64GB

2133

LRDIMM

3DS

†

8Rx4

64GB

128GB

2133

Type

Ranks Per

DIMM

and

Data

Width

DIMM Capacity

(GB)

Speed (MT/s);

Voltage (V);

Slot Per Channel

(SPC) and DIMM Per

Channel (DPC)

1 Slot Per Channel

1DPC

4Gb 8Gb

1.2V

RDIMM SRx4 8GB 16GB

2400

RDIMM SRx8 4GB 8GB

2400

RDIMM DRx8 8GB 16GB

2400

RDIMM DRx4 16GB 32GB

2400

LRDIMM QRx4 32GB 64GB

2400

LRDIMM

3DS

8Rx4 64GB 128GB

2400

Populating RDIMM/LRDIMM DDR4

Memory Modules for the E5-2600v3-

based Motherboard

Populating RDIMM/LRDIMM DDR4

Memory Modules for the E5-2600v4-

based Motherboard

Summary of content (1 pages)

PAGE 1
X10DAL-i Quick Reference Guide (Rev 1.0a) Contact Information Website: www.supermicro.com General Information: marketing@supermicro.com Tech Support: support@supermicro.com Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008 • • • • For • Manuals: http://www.supermicro.com/support/manuals/ • Drivers & Utilities: ftp://ftp.supermicro.com/ • Safety: http://www.supermicro.com/about/policies/safety_information.cfm Jumpers and Connectors Motherboard Layout and Features Jumper USB5/6 (3.0) USB3/4 (3.