Owner manual

－3－
The E10A/E10B is low impedance condenser head worn microphone
designed for
close-up applications, such as sports, gym, interview, drama, speech, and
musicians. The frequency response is wide and flat for nature sound.
Improved cable arrangement for simplicity and easy to hide for long-time
Wearing.
Description
! Professional head worn microphone to free the hands for other tasks.
! The E10A is cardioids polar pattern to reject unwanted noise and
increased gain before feedback.
! The E10B is bi-directional which is a pure pressure gradient that rejects
distant noises, and provides the same clean sound from the front and rear
side of the microphone.
! Low profile design, with multi-position rubber band to fit the microphone
properly.
! 1.5 meter cable.
! The E10ATQG/E10BTQG are TA4F plug for wireless system.
! The E10AXLR/E10BXLR are TA3F plug adapts with PS418S power
adapter and standard XLR3M plug for standard phantom power operation.
! The E10ADXLR/E10BDXLR are TA3F plug adapts with PS418D power
adapter and standard XLR3M plug for standard phantom power and
battery operation.
! The microphone and the package complies to EU 2002/95/EC and RoHS.
Features
E10AXLR/DXLR
E10BXLR/DXLR
TA3F
E10ATQG
E10BTQG
TA4F
PS418S PS418D
PO
W
ER MO
DU
LE
PS4
18
D
TA3M
XLR3M
User Guide
G O A N G - F A N N C O . , L T D .
© 2007, SUPERLUX I
LB100E10A01EN (Rev. 1)
nc.
Specifications
Back electret condenser
Type
Polar pattern
Element
50 to 15,000 Hz (Figure 3, 4)
Frequency response
Sensitivity
(at 1,000 Hz Open Circuit Voltage)
Phantom: 200Ω
Battery: 600Ω
Phantom: 1,000Ω
Battery: 2,000Ω
Rated impedance
Minimum load impedance
E10A: Cardioid (Figure 1)
E10B: Figure 8,Noise-Canceling
(Figure 2)
Pressure gradient,
FET preamplifier.
Max. SPL (1,000Ω load)
Dynamic range(1,000Ω load)
J U S T P L A Y I T
E
E
10A
10B
Environmental conditions
71 dB
Signal-to-noise ratio
(1,000 Hz at 1 Pa)
Equivalent noise level
(A-weighted)
The E10A and E10B operates
between -10℃ to +50℃(14℉
to 122℉) with relative humidity
between 0 to 95%.
Net weight
30.0 grams (1.05 oz),
accessories excluded.
Headset Condenser Microphone
E10A：-44dBV/Pa (6.31mV/Pa)
E10B：-42dBV/Pa (7.94mV/Pa)
*. 1Pa=94dB SPL
E10A
Battery:
E10B
Battery:
Phantom: 139dB SPL
129dB SPL
Phantom: 137dB SPL
127dB SPL
*. THD≦1% 1kHz
Less than 23dB (IEC/DIN 651)
E10A
Phantom:
Battery:
E10B
Phantom:
Battery:
116dB SPL
106dB SPL
114dB SPL
104dB SPL
Pin 2 output positive voltage
(related to pin 3) when diaphragm
receives positive pressure.
(Diaphragm moving inward)
Polarity
Power supply
E10ATQG/E10BTQG:
For wireless system
E10AXLR/E10BXLR:
Phantom 9 to 52V DC, 3.5mA
E10ADXLR/E10BDXLR:
Phantom 9 to 52V DC, 3.5mA;
Battery 1.5VDC (AA), 1200 hrs
typical (alkaline).
－1－ －2－
E10A
TYPIC AL POLAR PATTERN (Figure 1)
25 0 Hz
50 0 Hz
10 00 Hz
20 00 Hz
40 00 Hz
80 00 Hz
E10B
TY PICAL FR EQUENCY RESPONSE (Fi gur e 4)
FREQUENCY IN Hz
Frequency Response
RELATIVE RESPONSE IN dB
dB
10
-1 0
-2 0
20 50 10 0 20 0 50 0 10 00 2000 50 00 10 00 0 2 00 00 H z
0
E10A
TY PICAL FR EQUENCY RESPONSE (Fi gur e 3)
FREQUENCY IN Hz
Frequency Response
RELATIVE RESPONSE IN dB
dB
10
-1 0
-2 0
20 50 10 0 20 0 50 0 10 00 2000 50 00 10 00 0 2 00 00 H z
0
E10B
TYPIC AL POLAR PATTERN (Figure 2)
20 0 Hz
10 00 Hz
10 000 Hz