User's Manual

ManualsBrandsSUPERHEXA ManualsElectronicsSUPERHEXA Vision

Table Of Contents

120mm(±0.5)

240mm(±0.5)

120mm(±0.5)

* If corrective lenses are needed on a daily basis,

use the included frames to match them.

* While removing, do not shake the

frame violently, and do not pinch

the edge of the frame to remove it.

Removing

1) Hold the temples of the camera glasses with the le hand as shown in the illustration;

2) Press and hold the part with the right thumb as shown in the illustration, hold the frame with the rest of

the ﬁngers, and press down slightly to remove the quick-release frame.

4. Installing/Removing the Quick-release Frame

Installing

1) Take out the silicone plug in the frame slot;

2) Align the quick-release frame with the frame slot, and then push it in with the ﬁngers.

How to use the camera glasses

Operating with the power buon

Press and hold for 3 seconds when the camera

glasses are turned oﬀ: Turning on

Press when the camera glasses are turned on:

Entering/Exiting the standby mode

Press and hold for 10 seconds: Forced system

restart

Press and hold for 1 second when the camera

glasses are turned on: Entering the system menu

Power Buon

Recording

Wear the camera glasses correctly and tap the

touchpad to record.

Photo mode: Tap to take a photo

Recording mode: Tap to start/end recording

* While recording, the indicator blinks white as a

recording reminder to protect the privacy of the

recorded person.

Zooming

Wear the camera glasses correctly, press and hold the touchpad with one ﬁnger, and swipe forward and

backward to zoom.

Switch between photo-taking and recording

Wear the camera glasses correctly, press and hold the touchpad with one ﬁnger, and swipe down to switch

the recording mode.

Viewing more features

Wear the camera glasses correctly, and press and hold the touchpad with two ﬁngers to view more features.

3. How to Use

Charging

Please connect the charging cable as shown in the illustration to ensure correct charging.

Indicator Status:

Blinking yellow: Charging, baery level lower than 30%.

Blinking green: Charging, baery level higher than 30%.

Remaining green: Fully charged.

Wearing

* The AR optical display supports 15°rotation downwardly and

horizontally. Do not over rotate.

* Please charge the camera glasses with the magnetic charging cable included with it.

* Do not wear and use the camera glasses while charging.

Power Buon

Heat Dissipation Mesh

Frame Slot

Microphone

Magnetic Contact Point

Microphone

Nose Pads

AR Optical Display

Indicator

Periscopic Telephoto Lens

Wide-angle Camera

Optical Sensors

Touchpad

Read this manual carefully before use, and retain it for future reference.

1. Product Overview

SUPERHEXA Vision is a pair of telephoto recording glasses featuring 1X-15X hybrid zoom capability. It

supports ﬁrst-person view (FPV) capturing and recording based on a real-time AR near-eye display (NED)

system, providing an easier and funnier recording experience. SUPERHEXA Vision is pre-installed with a

Qualcomm Snapdragon standalone computing platform. This makes it free from peripheral devices and can

be used alone, thus realizing features such as freeing up hands and recording life anytime and anywhere.

Illustrations of products and accessories in the user manual are for reference purposes only.

Actual products and functions may vary due to product enhancements.

2. Accessory List

Metal Adapter

Suede Glasses Wipe

Portable Storage Pouch

Quick-release Frame

Magnetic Charging Cable

Binding the device

Downloading the app

Binding

When the camera glasses are turned on for the ﬁrst time, it enters the "Ready to pair" interface.

1) Enable Wi-Fi and Bluetooth on the phone;

2) Open the phone app, log in to the account, tap "Add your ﬁrst device", select the camera glasses to

connect (the device name is "MJSV-xxxx" by default, and xxxx indicates the last four digits of the SN, which

can be checked on the SN label in the packing box), and then follow the instructions to pair the device;

* Due to the enhancements of the app and the camera glasses system, the actual operation may slightly diﬀer from

the description. Please follow the instructions given by the app.

3) When the pairing code shown on the AR optical display of the camera glasses matches that of the phone

app, tap the touchpad of the camera glasses to complete the pairing.

* The indicator blinks blue while pairing and goes oﬀ aer being paired successfully.

* While pairing, please make sure the phone's Bluetooth is enabled and the camera glasses are connected with the

phone properly.

The camera glasses need to be used together with the phone app. Scan the QR code below to download

and install the app. Bind the camera glasses with the phone app for ﬁle transfer, camera glasses seings,

video recording, ﬁrmware update, and other operations.

App QR code Compatible with:

Android 8.0 & iOS 11.0 or above

7. Safety Precautions

1) Do not use the camera glasses near heat sources such as radiators, heaters, ﬂames, or other heating

devices, or in environments with too high or too low temperature;

2) Do not block the heat dissipation vent. Use the camera glasses according to the user manual;

3) The camera glasses contain a non-removable built-in baery. Incorrect baery replacement may cause

an explosion. Do not disassemble the camera glasses by yourself;

4) Do not disassemble, strike, squeeze, or cut the baery, or it may cause an explosion. Do not expose the

baery to sunlight, ﬁre, or other environments with extreme heat;

5) Do not subject the baery to extremely low air pressure, as it might lead to leakage of ﬂammable liquids

or gases, or even an explosion;

6) Stop using the baery if there is any swelling;

7) Do not use the camera glasses when driving a motor vehicle or doing strenuous exercise;

8) The camera glasses contain a built-in baery temperature sensor. If the detected temperature of the

camera glasses is too high, please follow the instructions on the display;

9) Due to friction, wearing the camera glasses for a long time for activities may cause skin irritation. In this

case, stop wearing the camera glasses;

10) The skin-ﬁing position of the camera glasses is made of professional and healthy materials, so users

can wear it with conﬁdence. If any skin discomfort or allergic reaction occurs during wearing due to

individual diﬀerences, please stop wearing it immediately and consult a doctor;

11) Do not use the camera glasses in rainy days or water;

12) Do not use other chemical solvents or cleaning solutions on the camera glasses;

13) No adapter is included with the camera glasses. Please use a CCC-certiﬁed 5 V/2 A power adapter;

14) These camera glasses and their accessories may contain small parts. To prevent children from choking

or other dangers or damages, please keep the camera glasses and their accessories out of the reach of

children.

6. AR Optical Display Care and Maintenance

1) AR optical display is very precise. Please do not touch directly with your hands during use to avoid

abrasions and scratches.

2) If the display is dirty, please blow oﬀ the dust on the display with a blower, then use the included glasses

wipe to dip in a small amount of alcohol and gently wipe it.

3) To prevent voiding the warranty, do not disassemble or modify the camera glasses and their accessories.

In case of malfunction, please contact the aer-sales service team.

4) If the device is broken into pieces aer colliding with a hard object or experiencing excessive force, do

not touch or aempt to remove the broken parts. Stop using the product and contact the aer-sales

service team immediately.

5. Indicator Descriptions

8. Specifications

Name: SUPERHEXA Vision

Model: SV1G

Memory: 32GB*

Processor: Qualcomm Snapdragon

Recording Parameters: Telephoto Camera 8M 5X (120 mm) UHD Wide-angle Camera 50M (28 mm)

Display: Sony Micro OLED 0.23 inch

Bluetooth: Bluetooth 5.0

Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n/ac 2.4 GHz, 5GHz

FCC ID: 2A74NSV1G001

IC ID: 28886-SV1G01

Rated Input:

―

― ― ―

Li-Polymer Baery: 1020 mAh/3.95 Wh (typical)

Weight: 100g (excluding the quick-release frame)

Frame Size: 54□19-147

Operating Temperature: -10°C to 35°C

9. Warranty and Return Policy

The Superhexa Limited Warranty covers Superhexa products against manufacturing defects beginning on

the original purchase date. The warranty period is 12 months or another speciﬁed period as the applicable

consumer laws in the consumer's county of purchase require. Our warranty is in addition to rights provided

by applicable consumer laws.

Main body of camera glasses

Name Performance error

Display error

Touchpad error

Couldn't turn the camera glasses on

Couldn't vibrate during interaction

Camera error

Couldn't connect to the phone app

Couldn't charge

For aer-sales care, please contact: 400-100-5678

The aer-sales email address: service@superhexa.com

Website: superhexa.com

Manufactured by: Beĳing Superhexa Century technology Co., Ltd.

Address: No. 1022, Floor 1, Area A, No. 1, South Anningzhuang Back Street, Haidian District, Beĳing, China

Made in China

Disclaimer and Warnings

Thanks for purchasing SUPERHEXA Vision. Please abide by the laws and regulations of the countries or

regions where the product is used, and use the product for legitimate purposes. You are responsible for all

the consequences that may arise from the improper use of the camera glasses, and the producer and seller

of the camera glasses will not bear any legal responsibility. By using the camera glasses, you fully

understand and agree to this disclaimer and warnings.

Superhexa Vision User Manual

Fully charge the camera glasses before use.

Press and hold the power buon for 3 seconds to turn the camera glasses on. Aer the camera glasses are

worn, the screen automatically lights up and the glasses start working. Fine-tune the nose pads of the

camera glasses and slightly rotate the angle of the display to ensure clear content on it.

OTA ﬁrmware updates

When the camera glasses are connected to the app, the app automatically checks the latest version for the

system. Please follow the instructions given by the app to update the system.

1) Network connection is required for the app while checking and downloading update packages. Please make

sure the phone's network connection is normal;

2) While updating, please make sure the phone's Bluetooth is enabled and the camera glasses are connected

with the phone properly;

3) Please make sure the camera glasses' baery level is more than 50% before OTA updates.

Indicator Status

Blinks white three times

Blinking white continuously

Blinks white once

Blinking blue continuously

Blinking yellow continuously

Blinking green continuously

Remaining green

Descriptions

Record

Take a photo

Pairing

Charging, baery level lower than 30%

Charging, baery level higher than 30%

Fully charged

* As the system and cache will take up space, the actual available storage space of the camera glasses will

be less than the total storage space.

When operating restrictions are necessary (for example, using accessories worn by the human body) under

certain conditions, the operating conditions and the minimum separation distance required between the

user and the wireless device must be clearly speciﬁed in the manual to ensure compliance. The SAR of the

camera glasses is xxxx (actual rate tested according to IEEE 1528-2013)

The Bluetooth word mark and logo are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by us is under license. All product names, trademarks, and registered trademarks are the

property of their respective owners.

Performance Fault List

Summary of content (3 pages)

PAGE 1
20mm(±0.5) Disclaimer and Warnings Thanks for purchasing SUPERHEXA Vision. Please abide by the laws and regulations of the countries or Superhexa Vision User Manual regions where the product is used, and use the product for legitimate purposes. You are responsible for all the consequences that may arise from the improper use of the camera glasses, and the producer and seller of the camera glasses will not bear any legal responsibility.
PAGE 2
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 3
IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.