Technical Specifications

Version:
USA
Last update:
2018-5-30
TECHNICAL SPECIFICATIONS
Bevel
Painted
UFH
See IM
Lock
Tight lock
Installation
Floating
Layer
Thickness (mm)
Thickness (mil)
Top Layer
0.30
12
Quartz enhanced UV cured coating
Core
3.70
145
Total
4.0
157
CERTIFICATIONS & CHEMICAL PROPERTIES
Norm
Item
Test method
Requirement
Result
EN 14041
Emissions
EN 717-1
≤ 0.124 mg/m3
E1
Decret No2011-321
Emissions
ISO 16000
TVOC<1000µg/m3
VOC A+
GreenGuard Gold
Emissions
Spectrometry, chromatography
TVOC
≤
220µg
GreenGuard Gold Certified
Prop 65
Orthophthalates
Spectrometry
ND
Compliant
CPSIA
Lead
CPSC-CH-E-1002-08
≤
90ppm
Compliant
EU REACH Regulation
PAHs
Spectrometry, chromatography
<1mg/kg
Compliant
SVHC
Spectrometry, chromatography
≤ 0.1% (w/w)
Compliant
EN 14041
CE Certification
Multiple
Multiple
Compliant
PHYSICAL PROPERTIES
Norm
Item
Test Method
Requirement
Result
ASTM F3261
Surface Integrity
ASTM F1914
No puncture
Pass
Dimensional Stability
ASTM F2199/ISO 23999
∆W/∆L
≤
0.2% (commercial)
Pass
Curling
ASTM F2199/ISO 23999
≤2mm
Pass
Length tolerance
ISO 24337
+/- 2 mm
Pass
Width tolerance
ISO 24337
+/- 0.4mm
Pass
Thickness tolerance ASTM F387
+/- 0.13mm (no backing);
+/- 0.20mm (with)
Pass
Squareness
ISO 24337
0.25mm
Pass
Flatness ISO 24337
Length: ≤ 0.50% (concave) ≤ 1.0% (convex)
Width:
≤
0.10%(concave)
≤
0.15% (convex)
Pass
Residual Indentation
ASTM F1914
≤0.18mm (70lbs/34kg)
Pass
Static load
ASTM F970/ASTM F387
≤0.13mm
Pass
Resistance to Chemicals
ASTM F925
Slight change only
Pass
Resistance to Heat
ASTM F1515
△
E
≤8
Pass
Resistance to light
ASTM F1514
△
E
≤8
Pass
ASTM F1700*
Thickness tolerance
ASTM F386
+/- 0.13mm
Pass
Squareness
ASTM F2055
0.25mm
Pass
Residual Indentation
ASTM F1914
≤ 8% (140 lbs/63.5kg)
Pass
Dimensional Stability
ASTM F2199
∆W/∆L ≤ 0.16%
Pass
ISO 10582
Residual Indentation
ISO 24343-1
≤ 0.1mm
Pass
Resistance to light
ISO 105-B02:1994,
≥ Grade 6
Pass
Locking strength (23
℃
)
ISO 24334
Long side
≥
2.0 kN/m, Short side
≥
3.5 kN/m
Pass
Castor chair
ISO 4918
Only slight change
Pass
NALFA LF 01-2011
Resistance to Chemicals
NALFA LF 01-2011
Slight change only
Class 4, meets commercial requirements
Impact Resistance
NALFA LF 01-2011 3.5
≥ 1400mm
Class 4, meets commercial requirements
Impact Resistance
NALFA LF 01-2011 3.6
≥ 500mm
Class 4, meets commercial requirements
EN 14041
Thermal Resistance (R)
EN 12667/ASTM C518
NA
Suitable for underfloor heating systems
Slipperiness
EN 13893
≥
0.3
Pass
Reaction To fire
EN 13051-1
NA
Class Bfl -S1
Static Electrical Propensity((voluntary))
EN 1815
≤
2.0kV
NA
Others
Density
ISO 23996
NA
Around 2000kg/m3
Airborne sound transmission
ASTM E413-16
≥50
STC 68
Impact sound transmission
ASTM E989-6
≥50
IIC 65
Reducing impact sound transmission
ASTM E2190-16
NA
delta IIC 15
Slipperiness
ANSI A137-1
≥
0.42
Pass
Slipperiness
DIN 51130
NA
R10
Rolling Load
ASTM F2753
NA
NA
Fire Resistance (CHF)
ASTM E648/NFPA 253
≥0.45
Class 1
Specification Sheet RLVT
Type
Waterproof thermoplastic composite
*Note: Only tests specific to ASTM F1700 are listed here; for tests and requirements similar to ASTM F3261, please refer to the tests under that standard
Page 1 of 3