User's Manual

ManualsBrandsSuper Nova ManualsElectronics2-Way Security Transceiver

RW6400T 2 Way Transmitter (TR5) Operation manual

LCD Panel Function Shown:

To Anti-Car Jacking: Main Unit Parking Flash 2 times and LED flash Quickly (no picture shown).

Button 5: a. Show the company Logo or the last message.

b. Keep press 3” to Change Channel I or II ( 1

Car or 2

Car).

c. Press 5 times to Voice or null voice prompt for button operation.

Button 5

START

Basic function of button :

Button 1 : a. Arm.

b. Keep press 3 second to Panic.

Button 2 : Disarm (and it will open the central

look on driver side.) than press one

more time in 5”, it will open the central

lock on other doors.

Button 3 : a. Remote 1

aux. output (Trunk pop).

b. Keep press 2-3” to remote 2

aux.

output.

Button 4 : Remote start --- press again to off.

Button 1+2 : a. When arming --- keep press 3” to

all (shock & option) sensor

bypass.

b. When disarm --- press 3” to valet

mode, when keep 6” to valet

park

mode.

Button 1+3 : To anti-car jacking.

Button 2+4 : Chirp defeat arm / disarm

TR5 La

out Descri

tion

LCD

Panel

Button 2

Button 4

(

AUX

)

Button 1

Button 3

Arm

Car)

Disarm

Car)

Chirp defeat disarm Chirp defeat arm

Panic

Door open

aux. output

Trunk POP

(or Hood Open)

Data translate..! Low battery

Remote Start

(Picture move)

Valet Park

(flash 20

ti )

Valet

Warn away

IGN

VLT VLT

Transmitter

learning

Shock Sensor

(hammer move)

Central

Unlock

Central

Lock

Logo

USA

Summary of content (6 pages)

PAGE 1
RW6400T 2 Way Transmitter (TR5) Operation manual Basic function of button : TR5 Layout Description Button 1 : a. Arm. b. Keep press 3 second to Panic. Button 2 : Disarm (and it will open the central look on driver side.) than press one more time in 5”, it will open the central lock on other doors. Button 3 : a. Remote 1st aux. output (Trunk pop). b. Keep press 2-3” to remote 2nd aux. output. LCD Panel (AUX) Button 5 Button 4 : Remote start --- press again to off.
PAGE 2
6400 Updated Program Option Chart PROGRAM: RW6400C0.HEX Option Option Description Fac.
PAGE 3
P1 P2 P3 Voltage Detect setting use two jumpers (1=short, 0=open) P1(0), P2(0) = 91% P1(1), P2(0) = 92% P1(1), P2(1) = 93% *Default N/A How to Update Program Option Function: 1) Turn ignition to the “ON” position; Hood “ON” 2) Press valet override switch 5 times 3) Press valet override switch the number of times corresponding to the “feature setting chart”.
PAGE 4
RW6400 WIRING DIAGRAM (F2WA-1) (NPC3) SHOCK SENSOR OVERRIDE SWITCH LED GREEN RED BLUE PURPLE GREEN BLUE PINK WHITE LOCK(-) (+)12 VDC UNLOCK(-) DOOR INPUT(+) DOOR INPUT(-) HOOD INPUT (-) CAR JACKING or GLOW PLUG(+) INPUT (Diesel engine only) PEDAL BRAKE(+) RESET INPUT (Optional) NPC3 Module PINK BLACK RED GREEN BROWN BROWN/WHITE BLACK/WHITE GREEN/RED BLUE/BLACK BLUE/WHITE ORANGE ORANGE/BLACK For GLOW PLUG(-) INPUT +12VDC TRIGER(-) TO START/STOP ENGIN (+)SIREN (-)HORN (-)500mA DOME LIGHT (-)AUX 1 (-)
PAGE 5
How to use the “Code Learning” for RW6400 Please following step by step 1. Turn ignition (on) and turn hood (on) (waiting for 5 second for signal feed back) 2. Press the override switch 4 times (then the parking light will flashed 4 times, led steady light on) 3. Presses the button ➀ (lock) and button ➁ (unlock) at same time, for new transmitter for learning, siren chirps 2 times than waiting the LCD shows picture of “attain” it means this transmitter is completed for code learning. 4.
PAGE 6
Notice: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.