TC4140BA OPERATIONAL MANUAL 7 | FORMAL CODE Ns | HOPPING VE Nu | NEW HOPPING (MAXIMAL BUTTON press again to disarm B. Keep press 27 panic ( press again to off } C. When ignition on — door leckfunlock BUTTON © © A. Remote Ist aux. output B. When arming keep press 27 to car finder C. When arming within 57 keep press 2" to option sensor bypass D. When ignition on keep press 27 to anti-car jacking BUTTON ®1@ : A. Chirp defeat arm / Chirp defeat disarm B. Keep piss 27—— ~ femoral 2nd aux. output C.
Special Feature of TC4140BA Alarm 1. Code Learning Main box will learn code from transmitter, maximum up to 4 codes 2. Anti-scanning CPU of alarm receiving correct code may not respond immediately unless continuously more code have been confirmed. This conservative attitude keep the system not disarmed by a scanner, so called ‘anti-scan’. 3. Up-grade to code hopping All those system can be upgraded to ‘code hopping’ to offer better protection at a lithe more cost = Of course.
9. All sensor bypass (Shock & Optional Sensor) When arming with in 5 seconds, press button all sensor bypass for over 2 seconds, parking lights flash 3 times means all sensor by pass. Shock & Optional Sensor trigger temporary eliminate (Door sensor trigger still work) until alarm were disarmed and armed again. This feature is used when the user try to avoid alarm noise disturbing the neighborhood 10. Chirp defeat arm/disarm Press the transmitter to arm or disarm.
18. 2 stage shock sensor with current sensing programmable (optional) Light touch one long chirp only (warn away) Heavy touch siren blow over 20 seconds Main box can sense door opening or ignition on (starter cranking) from current sensing by voltage drop down . This feature also can be eliminated (programmed by a wire loop) when installer connect door sensor, this feature become unnecessary. 19, Last door arming (programmable) Ignition off. door open and closed.
28. Over-ride switch 4 Functions of the over-ride switch A. Ignition on, press over-ride switch to over-ride alarm when in arming B. Ignition on, keep pressing § seconds to enter code learning mode C. Ignition on to press over-ride to reset special hi-jacking D. Ignition on, press 5 times to enter valet mode. 29, Parking lights relay built-in How to use the “Code Learning” a Ignition on, press over-ride switch 5 seconds until siren chirps § Times, Parking lights on means system in Code Learning mode b.
FCC INFORMATION The Federal Communications Commission Radio Frequency Interference Statement Includes the following Paragraph: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and.