CA13A OPERATIONAL MANUAL | J SANGRIA COVE N3 | HOPPING BUTTON © :A.Am press again to disarm NO} NEW HOPPING B. Keep press 2" — panic ( press again to off) (K2p1a1) C. When ignition on — door lock CAR JACKING BUTTON © : A. Chirp defeat arm / Chirp defeat disarm. = B. When ignition on keep press 2” to valet mode ( press again to normal function ) BUTTON A. When arming — keep press 2” fo bypass shock sensor B.
13 WIRING DIA OVERRIDE SWITCH x, 15 Amp FUSE =1 RED — +12vDC BLACK GROUND Ly WINTERGREEN LIGHT ~] BLUE —— NIC GREEN con] UNLOCK PURPLE/WHITE N/O GRAY NIC _ GITE com LOCK STARTER PURPLE BLUE — IGNITION YELLOW STARTER DISABLE BE WHITE/RED —— = BROWN/WHITE DOOR INPUT() #7 RED y WHITE/BLUE eave— Eo frock BLACK SENSOR BLUE x BLUE Jer BEEN (UNLOCK.
Special Feature of 100 Serial A Type Alarm 1. Code Learning Main box will learn code farm transmitter, maxima up to 4 codes. 2. Arm condition memory When arming, cut off power supply from battery, alarm still keep memory of naming, whenever power is on again, alarm trigger immediately, siren blow, parking lights flash, starter killer (ignition killer) still in arm status. When in normal status, power off then on again, alarm still in normal status, never cause trouble in maintenance garage, 3.
8. Car finder Siren chirps once, parking lights flash 6 tines to show cir p 9. Security re-arm Alarm arms again 30 seconds after disarm unless the duos have been depraved © it ion on. This feature is to avoid wees-touched or sim-disurnicd. 10.
17. Air compressor central lock (programmable) Some cars that are equipped with air compressor central Sock, such as Benz. Audi and VW ete. need a little longer signal for central locking system. This alarm cut oft {loop or remove one jumper can become long signal for lock. 18. Valet mode (key less entry) When ignition on, press button @ for over 2 seconds, the parking lights will flash 3 times, Means the alarm system is off, but the function of locking, unlocking, remain working. This is called valet mode.
25. Central lock relay built-in ( CA110 without relay built-in, only with ground output } This is available for any different design of door dock and unlock. How to use the “Code Learning” a. Ignition on, press over-ride switch § seconds until sicken chirps 5 Times, Parking lights on means system in Code Leaning mode. b. Press any button of new transmitter for learning, Siren chirps 2 Time means waiting for 2nd new transmitter 1o learn.
Notice: The Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC ID: M65SNVRI3 THIS DEVICE COMPLIES WITH PART 15 OF THE FERRULES. OPERATIONS I$ SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND 2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED. INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.