User's Manual

TaoTronics Wireless Receiver

Model: TT-BR08

Thank you for choosing the TaoTronics TT-BR08 Wireless Receiver. If in doubt,

please contact our customer support team by email at support@taotronics.com.

Package Content

1×TaoTronics TT-BR08 Wireless Receiver

1×USB Charging Cable

1×3.5mm Audio Cable

1×3.5mm Audio Receiver

1×User Guide

Product Diagram

1. 3.5mm Audio Output Port

2. Volume +

3. Previous track

4. Volume -

5. Micro USB Charging Port

6. Next Track

7. Power Button/LED Indicator

8. Microphone

9. Active Voice Control

PAGE 1
TaoTronics Wireless Receiver Model: TT-BR08 Thank you for choosing the TaoTronics TT-BR08 Wireless Receiver. If in doubt, please contact our customer support team by email at support@taotronics.com. Package Content 1×TaoTronics TT-BR08 Wireless Receiver 1×USB Charging Cable 1×3.5mm Audio Cable 1×3.5mm Audio Receiver 1×User Guide Product Diagram 1 9 8 2 7 3 6 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 3.
PAGE 2
How to Use 1. Charging 1) Connect the charging port with any USB charging adapter or active computer USB port. 2) Charging will start automatically with LED indicator turning green. 3) The receiver is fully charged when LED indicator turns off. Note:  Make sure the battery is fully charged before putting the headphones away for storage.  Charge the receiver at least once every 6 months when not using for a long time. 2.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.