TT-BH10 specification
1 Outlooking parameter and instruction Button instruction: 1.Volume + 2.Multi-function 3. Volume 4.LED 5.MIC 6.
2.Basic parameter Product size: 625*17*22mm Product weight：18g（bare） Working voltage：3.7 V Successive working time： Around 5~6 hours Charging time：1~2 hours Charging current：80mA No connected will be power off automatically：5 minutes Support 1pcs earbuds connect 2pcs smart phones Support APTX 3.1 Bluetooth Bluetooth chipset CSR8645A04 Bluetooth version 4.1 Profile A2DP AVRCP HSP HFP RF 2402~2480MHz Receiving distance 360° 10meter 3.2 MIC MIC SPEC:3.7*2.2*1.1mm MEMS MIC Sensitivity：-42±3dB 3.
Operation Power on：Press and hold down the power button till a blue light appears Power off：Press and hold down the power button till a red light appears Paring： Press and hold down the power button 6~8 seconds till red and blue light flashing Volume adjust: Press and Hold down the volume + to increase volume or Volume - to decrease the volume Music track choose：Press Volume - shortly to select previous track, and Volume + to select the next track.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
