Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B Asset Tracker ST4940B User Manual 1.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 2 of 14 Table of Contents Revision History .............................................................................................................................................................. 4 1. Introduction .........................................................................................................................................................
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Rev. 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 3 of 14 Disclaimer We, at Suntech, announce that this document and all other related products (i.e. device, firmware, and software) have been developed by the company, Suntech International Ltd., which is hereinafter referred to as “Suntech”. The information in this manual is believed to be accurate and reliable at the time of releasing.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Rev. 1.00 Date (dd-mm-yy) Page of Pages 30-10-18 4 of 14 Revision History Rev. No. Date Contents of Revision FirmwareNumber Author reflecting the latest revision 1.00 30 Oct.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 5 of 14 1. Introduction ST4940B: Asset Tracking Device The ST4940B is a multi-purpose tracking device useful for varied applications such as trailer or container management, vehicle/motorcycle tracking or any kind of valuable asset tracking. The ST4940B supports 4G networks and has a water resistant (IP67 compliant) rugged, hard-case Fixed type.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Rev. 1.00 2.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B 1.00 Date (dd-mm-yy) Page of Pages 30-10-18 2-1. H/W Specifications Item Description Battery Rechargeable 3.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B 1.00 2-2. GPS Specifications Item Description Receiver Type 56-channel U-blox7 engine GPS & QZSS L1 C/A, GLONASS L1OF, Galileo* E1B/L1, Compass* ready SBAS: WAAS, EGNOS, MSAS Update Rate 10Hz Accuracy1) Position 2.5m CEP SBAS 2.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 9 of 14 2-3. Operational Features Item Description Configuration either by SMS or PC Parameter Change either by SMS Command /Control either by SMS Reporting either by SMS (as a back-up) Basic Data reported NMEA location, Speed, Course, GPS signal status Message No.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B 3. Appearance Rev. 1.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Rev. 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 11 of 14 4. How to operate The ST4940B,a multifunctional battery-powered mini GPS tracker, is ideal for tracking personnel, valuable assets like merchandises that are delivered by putting it onto an object. While tracking, it reports location information about the object at a predefined interval and alerts if it detects motion of the object.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Charging Mode Rev. 1.00 Date (dd-mm-yy) 30-10-18 Page of Pages 12 of 14 Turn On As soon as a device in a status of power off is connected with a charger, only charging the device starts being processed. GPS LED is on. The battery indicator continuously blinks. If you press ‘power button ’of the device for more than 2 seconds in a mode of charging, the device will turn to be in a mode of normal operation.
Doc. Title ST4940B User Manual Concerning: Rev. Features and how to configure ST4940B Blue& Red 1.00 Date (dd-mm-yy) Page of Pages 30-10-18 13 of 14 Operating Status indicator LEDs (2 colors) Right after the device is turned on, the blue LED starts to blink as below. Five (5) minutes after the blue LED starts to blink, it is turned off automatically to save battery.
Doc. Title ST4940B User Manual Concerning: Features and how to configure ST4940B Protocol Watchdog Rev. 1.00 Date (dd-mm-yy) Page of Pages 30-10-18 14 of 14 If the PDP connection keeps going invalid status for a while about 40 minutes up to 1 hour, then the device will be reboot and recover the data communication in case that the problem was not caused by the network side.