User's Manual

HP 2.4GHz Wireless Trackball Keyboard

2.4G Dongle

(RK906、RX906)

User Manual

Important Information

For Windows® XP , Windows® Vista and Windows® 7 operating system, you

can use the keyboard immediately after plugging the dongle (receiver) into the USB

port.

Hardware Installation

1. Plug in the dongle into your available USB port.

2. Make sure the batteries of the keyboard is installed correctly. Please follow the

polarity signs in the battery compartment.

3. Please make sure the power switch on the back of the Keyboard is switched to

“ON” before using the Keyboard. When not in use, please turn the power switch to

“OFF” for power saving.

ID Pairing Procedure

Keyboard mouse and dongle has paired when ship out. If it can’t work, please follow

the steps to process the ID pairing procedure.

1. ID pairing/connect button location:

Keyboard ID pairing/connect button on the bottom of the keyboard.

2. After you plug the dongle into the USB port, please hold the keyboard close to the

dongle within 0.5M and press the “

” button over 5 second.

3. If ID pairing is successful, the LED on the dongle will bright 3 seconds.

4. If ID pairing is fail, please follow the steps above to pair ID.

Note:

-Make sure your PC is ON and running when doing the pairing procedure.

-You don’t have to pair ID again after changing batteries. If it can’t work, please follow

the steps above to pair ID.

PAGE 1
HP 2.4GHz Wireless Trackball Keyboard 2.4G Dongle (RK906、RX906) User Manual Important Information For Windows® XP , Windows® Vista and Windows® 7 operating system, you can use the keyboard immediately after plugging the dongle (receiver) into the USB port. Hardware Installation 1. Plug in the dongle into your available USB port. 2. Make sure the batteries of the keyboard is installed correctly. Please follow the polarity signs in the battery compartment. 3.
PAGE 2
Function Function Fn Icon Fn + Function Help F1 Internet F2 Sleep F3 Lock F4 Prev Track F5 Play/Pause F6 Stop F7l Next Track F8 Volume Down F9 Volume Up F10 Mute F11 Paring F12 Function Import Usage Information Battery: 1. We recommend using alkaline batteries for a longer battery life. 2. Don’t mix different types of batteries or new and old batteries together. Always replaced old batteries with new and same type batteries. 3. Remove batteries after long periods of non-use.
PAGE 3
Rating: Keyboard: 3VDC 20mA Dongle: 5VDC 60mA Max. operating temperature: 40∘C CAUTION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.