User's Manual

Wireless AIR Keyboard

RK017

User Manual

Important Information

For Windows® XP and Windows® Vista operating system, you can use the

moue immediately after plugging the dongle (receiver) into the USB port.

Hardware Installation

1. Plug in the dongle into your available USB port.

2. Make sure the batteries of the keyboard is installed correctly. Please follow the

polarity signs in the battery compartment.

3. Please make sure the power switch on the back of the keyboard is switched to

“ON” before using the keyboard. When not in use, please turn the power switch to

“OFF” for power saving.

ID Pairing Procedure

Keyboard and dongle has paired when ship out. If it can’t work, please follow the

steps to process the ID pairing procedure.

1. ID pairing/connect button location:

Keyboard ID pairing/connect button is “FN+ESC” key.

2. After you plug the dongle into the USB port, please hold the keyboard close to the

dongle within 0.5M and press the “FN+ESC” key.

3. If ID pairing is successful, the LED on the dongle will bright 4 times.

4. If ID pairing is fail, please follow the steps above to pair ID.

Note:

-Make sure your PC is ON and running when doing the pairing procedure.

-You don’t have to pair ID again after changing batteries. If it can’t work, please follow

the steps above to pair ID.

PAGE 1
Wireless AIR Keyboard RK017 User Manual Important Information For Windows® XP and Windows® Vista operating system, you can use the moue immediately after plugging the dongle (receiver) into the USB port. Hardware Installation 1. Plug in the dongle into your available USB port. 2. Make sure the batteries of the keyboard is installed correctly. Please follow the polarity signs in the battery compartment. 3.
PAGE 2
Import Usage Information Battery: 1. We recommend using alkaline batteries for a longer battery life. 2. Don’t mix different types of batteries or new and old batteries together. Always replaced old batteries with new and same type batteries. 3. Remove batteries after long periods of non-use. Battery leakage or corrosion may damage the device quality and cause danger. Rating: Keyboard: 3VDC 50mA Dongle: 5VDC 60mA Max.
PAGE 3
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. Industry Canada Notice Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.