User's Manual

Air mini BT Keyboard
EBK-11CA
User Manual
Important Information
System Requirements
Precondition for the use of the keyboard is that your device (PC, notebook, tablet,
handheld, etc.)
is hardware-sided Bluetooth-enabled (e.g. by an integrated Bluetooth module or
external adapter)
software-sided (Bluetooth) supports faultlessly the HID profile
software-sided (operating system) supports faultlessly standard keyboard drivers
with corresponding country code
Hardware Installation
Ensure for the further procedure that the used Bluetooth driver software was installed
correctly on your PC.
In order to open up the battery case which is on the back side of the keyboard, apply
light pressure and pull the entire cover on the back of the keyboard downwards.
Now put in two type AAA 1.5V batteries, considering the right polarity in the battery
case.
Switch the on/off switch to On.
After connecting the Bluetooth adapter with your PC, the blue Bluetooth logo appears
at the bottom right corner of the screen.
ID Pairing Procedure
Press and hold the Fn-key together with the ESC/ -key for 2 seconds. This initiates
the pairing process and a synchronization signal is sent to the BT receiver.
The synchronization process can take up to 10 seconds. The LED (top, left corner)
will be blinking in green during this process. When it turns off, the pairing is complete,
the synchronization process is now complete.
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

Summary of content (3 pages)