User's Manual

Step 9

Step 1

Step 2

※

※※

※ Install Hotkey Software ※

※※

※

　　 Put installation disk into floppy drive .

Then run the SETUP in the installation disk .

Until the below illustration show up , begin

to set up according to arrow .

　　After finishing above steps , you should

restart the computer . After that , hotkey can

work normally .

SHUTDOWN

CLOSE THE

PROGRAM

SLEEP

INTERNET

STOP & EJECT

ENLARGE &

REDUCE

VOLUME －

VCD PLAYER

PAUSE & PLAY

MUTE

VOLUME ＋

※

※※

※ Function instructions for Hotkey ※

※※

※

PAGE 1
※ Install Hotkey Software ※ Put installation disk into floppy drive . Then run the SETUP in the installation disk . Until the below illustration show up , begin to set up according to arrow . Step 9 After finishing above steps , you should restart the computer . After that , hotkey can work normally .
PAGE 2
Step 3 Step 6 Step 4 Step 7 Step 8 Step 5
PAGE 3
Wireless Keyboard User's Guide The Wireless keyboard is designed for PC system . With enhanced 88/89 key layout , and built-in Infra-Red technology , the wireless keyboard will be the best companion for your computing world . System Requirements : The Wireless keyboard requires a PC-compatible computer with one of these operating systems : windows 95/98/NT Installing the wireless keyboard on a Desktop computer .
PAGE 4
K8225 & K3225 Channel & ID Adjustment TABLE 1 Set Channel (1)For K8225--under the battery of keyboard , for K3225-at the bottom of receiver,there are switches(please see as Figure 1) for you to set up 16 channels and 16 IDs. If you channel 1 need to change the Channel or ID, please adjust the switches. channel 2 (2)Channel Set Up: Please reference to TABLE 1 channel 3 (3)ID Set Up: Please reference to TABLE 2.