User Manual

ML0511,A200,A300 User Manual

HOW TO USE THE LASER PRESENTER

1. Insert the receiver into the USB port.

2. Your operation system will start to install the receiver

automatically .And you can see the information as below display in your

computer.

3. In Win98/Me operation system you need to follow the instructions on

your screen .During the install process , the O/S may ask you to put

Win98 CD into the CD-ROM .

4. After the install process finished ,the presenter will be working .

Better than other competition:

1. RF (2.4GHz) Any angle ,up to 7 Meters.

2. 256 ID and RF-technique to Anti-interference .

3. No matter what PC Off or Battery Out ,The ID will not be lose.

4. Add PowerPoint Mode .

Notice:

If the precenter is not working :

1. Maybe no power , please check your battery .

2. Maybe different ID ,please link ID.

(1).push the button on Receiver.

(2).press “ID Link” within 10 SEC .

Function Button

PAGE 1
ML0511,A200,A300 User Manual HOW TO USE THE LASER PRESENTER 1. Insert the receiver into the USB port. 2. Your operation system will start to install the receiver automatically .And you can see the information as below display in your computer. 3. In Win98/Me operation system you need to follow the instructions on your screen .During the install process , the O/S may ask you to put Win98 CD into the CD-ROM . 4. After the install process finished ,the presenter will be working .
PAGE 2
CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS II LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB.
PAGE 3
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.