Use and Care Manual

ManualsBrandsSunnydaze Decor ManualsHammock StandsSunnydaze Steel Egg Chair Stand with Curved Leg Base- 78-in

  

Top Pole 1

B Bottom Pole 1

C Leg 4

2/2021 Page 1 / 3

EGG CHAIR STAND WITH

CURVED LEG BASE

AJ-901

Read all assembly and care instructions carefully before using this product.

Save these instructions for future reference.





JYF19036 KD Bracket

  

Bolt 4

E Washer 4

M8x55mm

Bolt Set

  

Hex Key 1

Spanner 1

This egg chair stand is not

designed to use like a swing.

Bouncing, swinging, or any

other signicant movements

while in use may cause

serious injury.

This stand must be on a level,

stable surface.

Make sure all hardware is

securely tightened before

each use.

Weight Limit: 265 lbs.Weight Limit: 265 lbs.

CAUTION

CHOKING HAZARD — This item

contains small parts that can be

swallowed. Keep children away

during assembly.

WARNING

Inspect packaging to ensure all

parts are accounted for before

disposing of packing materials.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.

Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with

the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine

the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty

If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:

customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact

Purchase Date: / / Order/Customer Reference Number:

Summary of content (3 pages)

PAGE 1
Purchase Date: / / Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.
PAGE 2
ASSEMBLY Assembly Tip: Ensure all parts and hardware align correctly before fully tightening the lock nuts. 2 A F Z X 1. Slide Leg (C) into Bottom Pole (B). Align the holes on the underside of each piece. Hand-tighten Bolt (D) and Washer (E). Repeat until all legs are attached. Tighten all bolts using Hex Key (X). 2. Slide Top Pole (A) onto Bottom Pole (B) and align the holes. Secure the poles by hand-tightening M8x55mm hardware (F) through the top holes. Repeat with the bottom holes.
PAGE 3
USE & CARE • SAFE USE: Do not use this chair for swinging, bouncing, jumping, twisting, or other excessive movements; doing so may cause serious injury, including, but not limited to, the stand tipping over. • CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in hanging chairs. Chair is not included. • INSPECTION: Ensure the stand is assembled correctly and the hardware is securely tightened before each use.