User's Guide

External
Product Introduction
Camera
Battery Instructions/Points for Attention
This device chooses 3.8V/3000mAh non-removable built-in
lithium battery. Please don’t disassemble it by yourself.
To ensure the lifetime of this battery, please don’t charge it
Minimalist Setting
It will take only a few steps to enable an intelligent commercial device
① 2G/3G/4G device. Insert the corresponding 2G/3G/4G card in
shutdown mode, and then turn the device on.
Technical Indexes of the Product
Items Technical Specification
Operating
after it has been completely consumed.
(Please read the technical specification table as for the details of card
support)
system
CPU basic
Android 7.1
Volume key
Power key
micro
SIM
SIM card slot
② Long press the power key for 2 to 3 seconds, light the screen, enter
the first boot interface and then operate according to the prompt.
As for this device, there are two types of Internet surfing modes
available.
③ WIFI setting
frequency
1.4GHz quad core
RAM 1GB LPDDR3
FLASH 8GB Nand Flash
Display screen 5 inch IPS, resolution 1280ⅹ720
Touch screen Capacitive touch control screen
·Click “Setting” button, and then enable WLAN to enter WLAN search
interface. Wait for its search and listing of available WLAN hot spots;
·Click WLAN to be connected. If one encrypted network is selected, it is
necessary to enter access password for connection.
Camera 30W FF
2G：B2/B3/B5/B8
Menu key
Main screen
key
How to download/use App
Wireless data 3G：WCDMA(B1/B2/B4/B5);EVDO(BC0/BC1)
4G：B2/B4/B7/B17/B28
Return key
Power key
Short press: light the screen, lock the screen.
Type-C USB
Speaker
Battery
cover
Charger
adapter
Charging
socket
As for the relevant Apps, you may complete the installation by opening
App market, browsing & downloading App in networking mode.
Common troubleshooting
Unable to turn on the device (for example: too low electric
Wi - Fi Built-in IEEE 802.11 a/b/g/n (2.4G/5G)
Bluetooth Supports Bluetooth 3.0/4.2 BLE supports iBeacon
Button Power key, volume key
Port USB Type Cport
Battery 3.8V/3000mAh
dimension
L 144.4mm ×W 73.2mm ×H 13.7mm
Long press: in shutdown mode, long press for 2 to 3 seconds
to turn on the device;
in service mode, long press for 2 to 3 seconds, and you can
choose to shut down or to reboot;
in crashed mode, long press for 11 seconds to automatically
reboot.
Volume key
Adjust the volume
Return key
Click to return to the previous screen
Main screen key
Click to quickly return to the main screen
Menu key
Click to quickly check the program running at the backstage;
choose application and sideslip to close this application.
Camera
Used for payment code scanning, supporting 1 D & QR code.
SIM card slot
Note: this slot uses micro-SIM card;
when inserting or taking out SIM card, the device must
be always in shutdown mode. If it is inserted or taken
out in the state of power-on, it may cause device fault.
Open the battery cover, insert or take out SIM card in the
direction as shown in this figure;
Charging base
(This base is optional)
Charging & battery instructions
This device supports the charging with USB line, and also
charging with charging base;
Insert the base adapter into the charging socket;
Place the device into the charging base in the direction as
shown in this figure;
It is being charged, there will be a corresponding icon to display
it on the screen;
If there is no charging icon displayed, please check whether
the direction in which the device is placed into the charging
base is correct or not.
quantity of the device)
·Power on the device or place it onto the charging base to
charge it. Turn the device on
after charging for 3 minutes;
·Check whether charging state is normally displayed or not on
the screen.
What to do if the device is crashed
Long press the power key for 11 seconds, and enter the
reboot state.
More using help
After turning on the device, please check the “User Guide” of
the application
Adapter
OUTPUT：DC5V/1A
INPUT：AC100~240V/0.15A
Package Content
One host
One piece of User Guide
One charging adapter
One USB connection line