User's Guide

Package Item List
Store Sense Camera, power adaptor, user guide, base, mounting sticker
and screws.
TF Card Slot
Device Name Store Sense Camera
Device Model FM010
Power Input 12V 1A
Resolution 1440x1440
Focal Length 1.8mm FF fisheye lens @F2.4
Angle of View 120
Wireless Network IEEE 802.11b/g/n 2.4GHz 150Mbps
Wired Network RJ45 10/100Mbps self-adaptive Ethernet port
PoE IEEE 802.3af
Audio Jack One built-in MIC
Night Vision ICR (Infrared Cut Removal); 8m IR fill light
Memory TF Card (up to 256GB)
Compatible Device Devices with Android 5.0 or iOS 9.0 or above
Dimensions Φ117.3 x 46.3mm
Weight 260g
Working Temperature -10°C ～ 45°C
Working Humidity ＜95% (non-condensing)
Illustration on the Status Indicator
Installation Guide
1、 Install a TF card (Optional. A TF card needs to be purchased separately.)
Please gently insert the TF card to the end of the slot following the direction
indicated.
,
Ma
nufacturer: Shanghai SUNMI Technology, Co., Ltd.
Address: Room 605, Block 7, KIC Plaza, No.388 Song
Hu Road Yang Pu District, Shanghai, China.
Table of Toxic and Hazardous Substances and
Content in the Product
：This symbol indicates that the content of this toxic or hazardous
substance in at least one homogeneous material exceeds the limit
specified in the GB/T26572.
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU, the RoHS Directive 2011/65/EU.
LEGAL INFORMATION ABOUT INTELLECTUAL PROPERTY
All company, product and service names mentioned herein are trademarks, registered trademarks or service
marks of their respective owners.Shanghai Sunmi Technology Co., Ltd. reserves the right to revise the content
of this document at any time without prior notice. No part of this document may be reproduced or transmitted
in any form or by any means, electronic or mechanical, including photocopying, recording or storing in a
retrieval system, or translated into any language in any form without prior written permission of Shanghai
Sunmi Technology Co., Ltd.
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the Store Sense Camera is in compliance with
the RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: www.sunmi.com.
：This symbol indicates that the content of this toxic or hazardous
substance in all homogeneous material is under the limit specified
in the GB/T26572.
The “environment-friendly use period” of the device is 10 years, which is shown as
the figure below. Parts which can be replaced, for example the charger, have
different environment-friendly use periods. Environment-friendly use period can only
be an effective period when the device is used in the normal conditions stated in this
user guide.
This table is made in accordance with SJ/T11364.
Basic Specs
4、Fix the base
Fix the base to the ceiling with the screws in this package.
3、Positioning & drilling
Stick the sticker to the position on a ceiling where you choose to install
your camera, and drill.
Camera Installation Direction Actual Monitoring Image
5、Install the camera
Screw the camera and the base in place, and connect cables including
the power cable and network cable.
IPC SS说明书
材质：128g哑粉纸
尺寸：成型后128*200mm
Lens
Please remove the
protective film before using
Reset Button
Press and hold it for 5s to reset
the device to factory settings
Pigtail Cable
Night Vision
Sensor
Status Indicator
Pickup
Power Port
Ethernet Port
Blue On: Connected/Normal
Blue Blinks: The camera is connected for video playback
Green Blinks: Network error/waiting for being connected and configurated
Green On: The device has been reset/is rebooting
2、Installation direction (Recommended)
This camera should be installed on a ceiling. Please see the instruction
below for the positions of mounting sticker, base and camera, and the steps
to install the camera in order to achieve your desired monitoring effect.
Applicable Scenarios
Target Users
Merchants and network administrators.
Functions
Monitor the whole store and display surveillance videos on the Web end or App.
A ceiling-installed camera for indoor monitoring.
T8A00 & T8A01_CN_EN_PVT_01
3. Please follow the tips on the APP to complete device network setting.
Download APP
Configure Software
Mounting Sticker Base
Before using the device, please complete user registration by downloading
SUNMI Assistant through searching on Tencent Appstore/SUNMI App Store
or scanning the QR code below.
1. After downloading SUNMI Assistant, please register and log in,
and click “Device” on the page bottom.
2. Click “Add a Device”, and select Store Sense Camera.t
4. Log in https://store.sunmi.com through a computer browser to check more
IPC settings and use more SUNMI application services.
Store Sense Camera
User Guide
Part
Circuit board
component
( Pb ) ( Hg ) ( Cd ) ( Cr(VI) ) ( PBB ) ( PBDE )
Toxic and hazardous substances or elements
Case
component
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to ra- dio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1
. This device may not cause harmful interference.
2. This device must accept any interference received, including interfer- ence that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
EU Conformity Statement