ITEM NO.:A101011400 WE HAVE YOU IN MIND, LET US SERVE YOU! Questions? Issues? CONTACT US 24 hours / 7 days a week www.sunjoyonline.com customer.care@sunjoygroup.
/7 Parts List Post A1 P000200397 4 Base B P000100297 4 Base cover C P006100153 4 Long beam(short side) D1 P000400804 2 Short beam(short side) E1 P000400805 2 Long beam(long side) F1 P000400806 2 Short beam(long side) G1 P000400807 2 Bottom tube of slanting beam H1 P000601213 4 Middle beam connector I1 P000501036 4 Slanting bar J1 P000601212 4 Long middle beam L1 P000601214 2 Short middle beam M1 P000601215 2 Long netting bar N1 P005700596 4 Short netting
/7 Hardware Pack 1 AA M6x15 bolt H010110016 8PCS BB M6 flat washer H050010023 88 PCS CC M6x15 bolt H010020011 48PCS HH M6x35 bolt H010020013 32 PCS Z M6 Wrench H090010009 2 PC Fig.1: Put base cover (C) through bottom of post(A1),then attach base(B) to Post(A1) by using bolt(AA) and flat washer(BB). Fi2-1:Insert shortbeam(long side)(G1) to long beam(long side) (F1), Repeat the step for short side beam(E1)/(F1). Fig.
/7 Fig.4-1、Fig.4-2: Attach netting bar (N1、O1) to across beam(F1、D1、G1、E1),then fix by using bolt(CC)Flat washer(BB). Fig.5: Attach the slanting support bar(X1)to across beam and post (A1) fix by using bolt (HH)and flat washer(BB)。 Hardware Pack 2 BB M6 flat washer H050010023 16 PCS HH M6x35 bolt H040010011 8 PCS EE M6 nut H040010011 8 PCS Fig.6: Attach slanting beam bottom tube(H1) to top of post (A1),fix by using bolt(HH)、flat washer (BB)and nut(EE). Fig.
/7 Fig.10: Fix long middle beam(L1) and short middle beam(M1) to middle beam connector(I1), by using bolt (HH)、flat washer(BB)and nut(EE). Fig.11: Attach adjustable tube(Y)to slanting beam(J1)long beam、short beam、middle beam (L1、M1)。 Fig.11-1: insert the adjustable tube(Y) to slanting beam(J1、M1、L1)( to the inner mounting hole) Fig.12: Fix small canopy(U1)to slanting beam(J1) (adjust tube(Y)according to the canopy size as Fig.
/7 Fig.13: Spread big canopy(T1),fix the four corner to slanting beam adjustable tube(Y), then close side edge Velcro。 Fig.14: Hang mosquito netting(W) and Curtain (V) to across beam and netting bar, by using ring (GG)。 Fig.15: Up the base cover(C),fix assembled gazebo on the groud by using Stake (FF)。 Fig.
/7 Care and Maintenance Our steel components for garden accessories and furniture are treated with rust inhibiting paint that protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur once these protective coatings are scratched. This is not a defect and thus not covered by the warranty. To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint.