Assembly Instructions Item#: 110101054 Vendor code: D-GZ916PST-B Thank you for your purchase! We are pleased that you have chosen Sunjoy for your outdoor furniture purchase. Our clear, easy to follow, step by step instructions will guide you through the project from start to finish.
Safety information •Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the production construction. •This package contains small items and plastic bags that should be kept away from children. •Keep assembly area at least 6 ft. from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires. •Proper placement of your product is essential. Do not place the product underneath electrical lines.
•For technical assistance on assembly or replacement parts please call our customer service department at 1-866-578-6569 for help. •This unit is heavy. Do not assemble this item alone. At least two or more people are recommended for safe assembly. •Tools Required for assembly (NOT included): Screwdriver, a hammer, and a ladder not lower than 2m (about 6.6 feet). Important Please do not return this product to the store.
Parts List Description Part# Label Qty Post GZ0916XXB01 A 4 Long horizontal screen GZ0916XXB02 B 4 Short horizontal screen GZ0916XXB03 C 4 Slanting bar connector GZ0916XXB04 D1 4 Middle beam connector GZ0916XXB05 D2 4 Hook GZ0916XXB06 E 1 Slanting bar GZ0916XXB07 F 4 Middle beam GZ0916XXB08 G 4 Long side of the large top GZ0916XXB09 H 4 Large top connector GZ0916XXB10 I 4 GZ0916XXB11 J 4 GZ0916XXB12 K 1 Stake plate GZ0916XXB13 L 4 Stake cover GZ0916XXB1
Hardware Pack 1 Description Part# Label Qty M6X20 Bolt BM06020C AA 40 M6 Washer UD06C BB 80 M6X25 Bolt YM0602CE CC 32 M6 Nut LM06C DD 8 M6 Wrench 1 A04D Z 1 M6 Wrench 2 W10D W1 2 PC Image Fig.1: Put the stake cover(M) on the Post(A) and lift the stake cover,then assemble the Stake slate(L) to the end of the Post(A) by using Bolt (AA)、Washer(BB). Fig.2-1: Assemble the Long horizontal screen (B) and the Short horizontal screen (C) by using Bolt (CC)、 Washer(BB) and Nut(DD). Fig.
Fig.3:Attach the Long horizontal screen (B) and Short horizontal screen (C) to the Post (A) by using Bolt (CC) and Washer (BB). Fig.4-1:Attach the slanting support slate (O) to the screen(B、C) by using Bolt( CC) and Washer(BB). Fig.4-2:Attach the Slanting bar connector (D1) to the Post(A) by using Bolt(AA)and Washer(BB). Fig.5:Attach the Mosquito netting bar (N) to the Long horizontal screen (B) and Short horizontal screen (C) by using Bolt (AA) and Washer (BB).
Fig.6:Assemble the Long side of the large top (H) and Large top connector (I) by using Bolt (AA) and Washer (BB). Fig.7:Insert the upper end of the Slanting bar (F) into the tube of Large top connector (I) Fig.8:Attach the lower end of the Slanting bar (F) in to the Post (A) by using Bolt (EE), Washer (BB) and Nut (DD). Fig.9:Insert the upper end of the Middle beam (G) into the tube of Long side of the large top (H). Fig.
Fig.13:Put Small Top Canopy (p) on the top, and secure it on four corners. Fig.14:Put the Middle canopy (Q) on the top, and secure it on four corners. Fig.15:Fig.14:Put the Large canopy (R) on the top, and secure it on four corners. ; Fig.16:Hang the Mosquito netting (T) on the screen (B、C) by using Plastic ring (GG),then hang the Curtain (S) on the Mosquito netting bar(N)by using Plastic ring (GG),make sure to keep the curtain outside of the mosquito netting. Fig.
Care & Maintenance •Before using, clean the product completely with a soft, dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely. •Do not use strong detergent or abrasive cleaners. •Do not machine wash. •Bolts can loosen over time. Be sure to check bolts occasionally, tightening as needed. •Protecting furniture from the elements, when not in use is highly recommended.