Assembly Instructions Item#:D-GZ916PST-B 1/8
Preparation: Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go together smoothly and give years of enjoyment. Important: 1. Keep all children and pets away from assembly area.
Parts List Post A 4 Long horizontal screen B 4 Short horizontal screen C 4 Slanting bar connector D1 4 Middle beam connector D2 4 Hook E 1 Slanting bar F 4 Middle beam G 4 Long side of the large top H 4 Large top connector I 4 J 4 K 1 Stake plate L 4 Stake cover M 4 N 8 O 4 Small canopy P 1 Middle canopy Q 1 Large canopy R 1 Curtain S 1 T 1 Slanting bar of the small top Small top connector Mosquito netting bar Slanting support plate Mosquito nettin
Hardware Pack 1 AA M6X20 Bolt 40 PCS BB M6 Washer 80 PCS CC M6X25 Bolt 32 PCS DD M6 Nut 8 PCS Z M6 Wrench 1 1 PCS W1 M6 Wrench 2 2 PC Fig.1: Put the stake cover(M) on the Post(A) and lift the stake cover,then assemble the Stake slate(L) to the end of the Post(A) by using Bolt (AA)、Washer(BB). Fig.2-1: Assemble the Long horizontal screen (B) and the Short horizontal screen (C) by using Bolt (CC)、 Washer(BB) and Nut(DD). Fig.
Fig.3:Attach the Long horizontal screen (B) and Short horizontal screen (C) to the Post (A) by using Bolt (CC) and Washer (BB). Fig.4-1:Attach the slanting support slate (O) to the screen(B、C) by using Bolt( CC) and Washer(BB). Fig.4-2:Attach the Slanting bar connector (D1) to the Post(A) by using Bolt(AA)and Washer(BB). Fig.5:Attach the Mosquito netting bar (N) to the Long horizontal screen (B) and Short horizontal screen (C) by using Bolt (AA) and Washer (BB).
Fig.9:Insert the upper end of the Middle beam (G) into the tube of Long side of the large top (H). Fig.10:Attach the lower end of the Middle beam (G) into the Middle beam connector (D) by using Bolt (EE), Washer (BB) and Nut (DD). Fig.11:Insert the Slanting bar of the small top (J) into the Small top connector (K), then screw the Hook(E) to the Small top connector (K), Fig.
Fig.13:Put Small Top Canopy (p) on the top, and secure it on four corners. Fig.14:Put the Middle canopy (Q) on the top, and secure it on four corners. Fig.15:Fig.14:Put the Large canopy (R) on the top, and secure it on four corners. Fig.16:Hang the Mosquito netting (T) on the screen (B、C) by using Plastic ring (GG),then hang the Curtain (S) on the Mosquito netting bar(N)by using Plastic ring (GG),make sure to keep the curtain outside of the mosquito netting. Fig.
hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warrant it to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply.