WDCT Color Display
Important Instructions & Information Important Instructions & Information This User Guide provides you with all the information you need to get the most from your phone. You must first set up your phone before you can use it. This doesn’t take long and is easy to do. Just follow the simple instructions on the next few pages. Need help? If you have any problems setting up or using your Suncorp WDCT Color Display WDCT45-A2 telephone, contact the Help line at 86-755-2573-3333.
Important Instructions & Information Important Safety Instructions To reduce the risk of fire. Electric shock, and injury to persons when using your telephone equipment, basic safety precautions should always be followed which includes the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read and understand all instructions. Follow all warnings and instructions marked on the product Unplug the equipment from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Important Instructions & Information Battery Safety Instruction CAUTION: To reduce the risk of fire or personal injury, read and follow these instructions: 1. Use only the following type and size handset batteries: DC 1.2V, 750 mAh, Ni-MH (Nickel Metal Hydride), AAA size batteries (2 each). 2. When inserting the batteries into the product, the proper polarity or direction must be observed. Reverse insertion of the batteries can cause charging that may result in leakage or explosion. 3.
Important Instructions & Information Equipment Approval Information Your telephone equipment is approved for connection to the Public Switch Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by Administrative Council for Terminal Attachments (ACTA). 1.
In This Guide Important Instructions & Information ________________ 3 Getting Started _________________________________ 11 Location .........................................................................11 Setting up .......................................................................12 Range indicator ..............................................................13 Setting the Date and Time .............................................13 Getting To Know the WDCT45-A2_________________ 15 Handset ...
In This Guide View Details ..................................................................27 Delete an Entry ..............................................................27 Call Features ___________________________________ 28 Managing Your Calls.....................................................28 Caller-ID ........................................................................28 Caller-ID With Call Waiting..........................................29 Call Waiting Deluxe ..............................
In This Guide Another Way To Access The Call Lists ........................44 Dial A Selected Entry ....................................................44 Call Lists Options ..........................................................44 Delete Calls Lists ...........................................................45 Time Settings __________________________________ 46 Setting the Date and Time .............................................46 Format Time (12 hr or 24 hr)......................................
Getting Started Getting Started 11 WARNING Do not place your WDCT45-A2 in the bathroom or other humid areas. Location You need to place your WDCT45-A2 within 6 feet of the AC power outlet and telephone Handset range socket so that the cables will reach. Make sure it is at least 3 feet away from other electrical appliances to avoid interference issues. Make sure it is at least 3 feet away from metal appliances to avoid interference issues.
WDCT45-A2 SunCorp
Getting Started Range indicator The symbol on your handset display indicates when you are in range of the base. If the symbol flashes and you hear a warning beep, you are out of range and will need to move closer to the base. The display shows Base and the number of the base last used. Setting the Date and Time If you have subscribed to the Caller-ID service, the time and date will be set automatically when you receive your first call. You can also set the time Manually, see page 46.
Getting Started Your Suncorp WDCT Color Display WDCT45-A2 is now ready for use. If you have purchased additional handsets: Ensure the charger is connected to the AC power outlet at all times. On each charger: 1. Connect the mains power adaptor to the charger and switch on. On each additional handset: 2. Insert the 2 x AAA NiMH batteries supplied into the handset, paying attention to the polarity of each (See page . Slide the battery compartment cover into place. 3.
Getting To Know The WDCT45-A2 Navigating the menu The up/down, left/right Navigation keys are location on the big dial button in the center of the handset. Option select buttons are located to the sides of the Navigation keys: You select the option displayed by pressing the Option button underneath it. For example, select Names by pressing the option button below it. Your WDCT45-A2 has a menu system which is easy to use. Each menu leads to a list of options.
Getting To Know The WDCT45-A2 Menu map: These are the options under each menu heading.
Using The WDCT45-A2 Simple and easy. Make a call Press then dial the number you want. Preparatory dialing Enter the number first. If you make a mistake, press Clear to delete. Press dial. Select the option displayed by pressing the button underneath it. For example, select Names by pressing the option button below it. to Call timer The display shows the duration of the current call. After you hang up, the total call time is shown briefly. End a call Press base.
Using The WDCT45-A2 21 Receiving Calls To answer a call, press . If auto talk (answer) is enabled (default, see page 39) and the handset is on the base, simply lift it up and speak. Providing you have subscribed to your network’s Caller-ID service, the caller’s number and name is displayed after the first ring. Speakerphone Speakerphone lets you talk to your caller without holding the handset to your ear. It also enables other people in the room to listen to both sides of your conversation.
Using The WDCT45-A2 Answer a call in speakerphone When the phone rings: Press (i.e., press 2 times for speakerphone mode). The call comes through the handset loudspeaker. If you want to switch the call to the earpiece, press . If auto talk (answer) is enabled (default, see page 39) and the handset is on the base, simply lift it up and then press the speakerphone.. to enable Redial You can redial up to 20 of the last numbers called.
Using The WDCT45-A2 23 Mute During a call, you can talk to someone nearby without your caller hearing you. 1. During the call, press Mute. The display shows Mute On. When Mute On is active, your caller cannot hear you. 2. Press Off to return to your caller. Paging You can use the button on the base to alert handset users or to locate a missing handset. 1. Press Paging calls from the base cannot be answered by a handset. on the base. The handset(s) ring. The display shows Paging. 2.
Using The WDCT45-A2 Intercom Calls If you have two or more handsets registered to your base, you can make intercom calls. Two handsets can be holding an intercom call while a third is making a regular telephone call. Call Another Handset 1. Press then the handset number you want (1-4). 2. Press to end the intercom call. 3-Way Conversations You can put an external caller on hold, Intercom to another handset, then hold a call between all parties. 1.
Using The WDCT45-A2 Transfer a Call You can transfer a caller (for a regular telephone call) to another handset. During the call: 1. Press . Your caller is put on hold. 2. Enter the handset number you want to transfer the call to (1-4). 3. When the other handset answers you can tell them they have a call, then press . The call is then transferred. If the other handset does not answer or you decide not to transfer the call, press to talk to your caller.
