User's Manual

AT&T IoT Store Wireless Device

AT&T IoT Store Wireless Addon Sensor

1. Bom list

Item

Description

QTY

ATTIOTSWL (AT&T IoT Store Wireless Device)

DC5V Adaptor

1.8 Meter Cable

Screw pack (include plastic anchors)

Drilling Script

ATTIOTSWLS (AT&T IoT Store Wireless Addon Sensor)

Magnet

CR-123A Battery

Mini Screwdriver

2. Preparation

Supply power to IoT device (Fig.1), take out the CR-123A battery from the wireless sensor,

remove the plastic sleeve, and put it back in (Fig.2)

User Manual (V2.0C)

CR123A

battery

LED

Panic button

Magnet

Tamper switch

Factory test switchs

(must be all off)

External wired sensor

input terminal (must

be short-circuited)

Fig2. ATTIOTSWLS Wireless Sensor

Fig1. ATTIOTSWL IoT Device

Pairing button

Page 1/3

PAGE 1
AT&T IoT Store Wireless Device User Manual (V2.0C) AT&T IoT Store Wireless Addon Sensor 1. Bom list Item Description QTY 1 ATTIOTSWL (AT&T IoT Store Wireless Device) 1 2 DC5V Adaptor 1 3 1.
PAGE 2
3. Enter/Exit pairing mode Click the pairing button of the IoT device, a beep will be heard, followed by the flashing of Door1-LED, indicating that it has entered the Door1 pairing procedure. Continue clicking the pairing button, pair Door2, Door3, exit the pairing mode and return to the working mode. 4. Clear previous pairing memory Enter Door1 pairing procedure, press and hold the pairing button for 6 seconds, a long beep indicates that the clearing is completed.
PAGE 3
11. FCC statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.