O P F Rest & Relieve™ Therapeutic Mattress Pad USER MANUAL O P F O P F Sleep warm. Sleep well.™ www.sunbeam.
WELCOME Thank you for choosing the Sunbeam® Rest & Relieve™ Therapeutic Mattress Pad, the ultimate in sleeping comfort. It features adjustable heat zones that you can customize to suit your preferences, so you wake up well rested and refreshed. Table of contents: Step-by-Step Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Twin or Full Size Mattress Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Queen or King Size Mattress Pad . . . . .
IMPORTANT INSTRUCTIONS DO NOT DESTROY IMPORTANT INSTRUCTIONS DO NOT DESTROY Warnings and Safeguards As with all electrical products, misuse of product or failure to properly follow the instructions may cause overheating, fire or personal injury. Please read the product label and all of the instructions before using your heated product.
STEP-BY-STEP SETUP STEP-BY-STEP SETUP Your Sunbeam® Rest & Relieve™ Therapeutic Mattress Pad Includes: Base Unit Mattress Pad Setup 1 Place the Mattress Pad on the bed with the label at the foot of the bed facing outward. This puts the zones in the proper position to warm your body ergonomically. Zone Connector Cables & Plugs 2 Place the base unit on the floor under the bed, and run the Connector cable(s) along the floor to the foot of the bed.
TWIN OR FULL SIZE MATTRESS PAD TWIN OR FULL SIZE MATTRESS PAD Remote Control At-a-Glance Features: Three adjustable heat zones for your individual total-body comfort 10 temperature settings per zone to create your ideal sleep experience Preheat setting to warm up your bed before bedtime Auto Off conveniently shuts off the Mattress Pad after 10 hours of operation ■ Cordless remote control operation for easy use from bed ■ Electronic display control with backlight for nighttime viewing ■ ■ ■ ■ Preheat warm
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Turning the Mattress Pad ON and OFF Adjusting Zones Individually Turn on the Mattress Pad on or off by pressing the “On/Off” button on the remote control. When on, the base unit will beep once, the display will light up, and all zones will appear outlined. NOTE: The backlight turns off after one minute to save battery power, but the Mattress Pad remains on. To turn the backlight on again, touch any button on the control other than the “On/Off” buttons.
OPERATING INSTRUCTIONS QUEEN OR KING SIZE MATTRESS PAD Auto Off Features: Auto Off conserves energy by automatically turning off the Mattress Pad after 10 hours of use. This is the factory default setting, and the display will read “Auto Off” when this feature is active. ■ ■ ■ ■ To deactivate Auto Off: press the “Auto Off/Stay On” button. The display will read “Stay On”, and the Mattress Pad will remain on until you turn it off manually using the “On/Off” button.
QUEEN OR KING SIZE MATTRESS PAD For Dual Users with a Queen/King Mattress Pad QUEEN OR KING SIZE MATTRESS PAD For Single Users with a Queen/King Mattress Pad For one-person use, you can set both sides of the queen or king size Mattress Pad to operate together as three wide zones. Green Zone Neck and Shoulders Blue Zone Neck and Shoulders Blue Zone Neck and Shoulders Blue Zone Lumbar Green Zone Lumbar Blue Zone Lumbar Blue Zone Feet 1 Turn remote control off.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Turning the Mattress Pad ON and OFF Adjusting Zones Individually To turn on each side of the Mattress Pad individually press the “On/Off” button on the Blue or Green side. When on, the base unit will beep once, the display for the selected side will light up, and all its zones will appear outlined. 1 To adjust any zone individually, press the “Select Zone” button that corresponds to the zone you want to adjust.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Preheating the Mattress Pad Auto Off Never get into a cold bed again during the Winter season. Preheat turns the heat up to warm your Mattress Pad before you get in. With this feature activated, each side starts preheating when it is turned on. This lets two people preheat their sides at different times. Auto Off conserves energy by automatically turning off each side of the Mattress Pad after 10 hours of use.
CARE AND CLEANING Taking care of your Mattress Pad is easy and safe as long as you follow a few simple steps. We recommend washing before initial use. Before Washing or Storing 1 Disconnect power cord from wall BEFORE detaching control cord from the Mattress Pad. 2 Ensure that no cords are still connected and none of the wires have worn through the fabric. 3 Carefully follow all washing instructions or your Mattress Pad may shrink and possibly cause a fire hazard. • DO NOT submerge control in water.
FREQUENTLY ASKED QUESTIONS FREQUENTLY ASKED QUESTIONS Q Who should NOT use the Rest & Relieve™ Therapeutic Mattress Pad? Q My remote control doesn’t work, and the display is blank. A The following people should NOT use the zoned Mattress Pad: A Check to make sure the batteries are installed properly, and that the + and –on the batteries match the diagram in the battery compartment.
FREQUENTLY ASKED QUESTIONS Q How do I restart my Mattress Pad after a power failure? A Press the “On/Off” button to turn the remote control off, then press “On/Off” to turn the remote control back on. The Mattress Pad will begin to warm. Q I bought two Mattress Pads for different bedrooms, and they don’t seem to be operating correctly now. ® A When you have two more Sunbeam wireless remote-controlled devices in a home, there is a slight change their signals may interfere with each other.