User Manual WARMING PRODUCTS 1
IMPORTANT INSTRUCTIONSDO NOT DESTROY Warnings and Safeguards As with all electrical products, misuse of product or failure to properly follow the instructions may cause overheating, fire, or personal injury. Please read the product label and all of the instructions before using your warming product.
Welcome Thank you for choosing a Sunbeam® warming product. With your purchase you’ve made a real investment in your comfort and can look forward to staying warm and cozy for many cool days to come. With over 50 years of experience and over 25 million households using a Sunbeam® warming product, you can rest comfortably knowing that Sunbeam® is the brand to trust…for quality and performance. Table of contents DD Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DD Remote Features: • REMOTE CONTROL – sends heat level control commands to the base unit and adjusts the blankets warmth accordingly.
1 2 3 Installing the Batteries 1 Remove the battery compartment door from the back of the remote control 2 Insert three AAA batteries, matching the + and - markings in the battery compartment to the markings on the batteries 3 Replace the battery compartment door 4 If your blanket has two remote controls, repeat steps 1 – 3 to install batteries in the second remote control.
Features: • ELECTRONIC DIGITAL CONTROL – for easy setting with backlit LCD • AUTO-OFF – 10 hour independent auto-off (see page 15) • 10 TEMPERATURE SETTINGS – select your personal comfort • PRE-HEAT – for cozy warmth before bedtime • SOLID STATE – for accurate and consistent heat control • EASY OPERATION – Electronic digital controller for easy operation • EASY GRIP – ergonomic control for easy operation DD Convertible CAUTION: Do not plug main power cord into the wall outlet until you have completely set
Using your Control: 1 To turn the control on, simply press the “On/Off” button. The backlit display light will reset itself by flashing “FF” and then will light showing the previous setting the unit was set during the last use and will begin to warm. CAUTION: ALWAYS turn the warming blanket/warming mattress pad “OFF” when not in use. 2 To turn the warming blanket/warming mattress pad OFF simply press the “On/Off” button.
DD 2 6
7
DD Z 8
9
DD Gradient 10
11
DD Y 12
13
Features: • 3 TEMPERATURE SETTINGS – select your personal comfort level • SILENT OPERATION – no clicking • SOLID STATE – for accurate and consistent heat control • EASY OPERATION – electronic controller for easy operation • EASY GRIP – ergonomic control for easy operation • AUTO-OFF – 3 hour independent auto-off Auto-off control LED Throw CAUTION: Do not plug main power cord into the wall outlet until you have completely set up your warming blanket per the instructions.
Auto-off feature Auto-off Feature: The “Auto-Off” feature is designed for safety and conservation of energy by automatically turning your warming product off after 10 hours of continuous use. (Three Hours for Warming Throw) The Auto-off function engages 10 hours from the time the control is turned “On”. For Dual Control: Whichever control is turned On first that controls 10 hour Auto-off feature will be initiated. The controls Auto-off features work independently from each other.
Care and cleaning OF YOUR WARMING PRODUCT Taking care of your warming product is easy and safe as long as you follow a few simple steps. Caution: Always disconnect the power cord and the blanket/mattress pad/throw connection cord at the connection end before washing. Carefully follow all washing instructions or your warming product may shrink and possibly cause a fire hazard. DO NOT Caution: Do not use commercial dryers or the dryers at your local laundromat.
Frequently asked questions OF YOUR WARMING PRODUCT Q Who should NOT use the warming blanket, warming mattress pad, or warming throw? Q I have heard that some warming products have Electromagnetic Fields (EMFs).
Q My warming blanket/warming mattress pad/warming throw doesn’t heat properly. O n / O ff A Check to make sure the cord is plugged into the module and the power cord is firmly connected to the wall outlet. Check that the control is “On”. If the system still fails to heat, try the following test to see if it is operating. 1 Fold the warming blanket, warming mattress pad, or warming throw 3 times over. 2 Connect the control to the module and plug the power cord into an outlet.
Limited Warranty Sunbeam Products Inc. (“Sunbeam”) warrants that for a period stated below from the date of purchase, this product will be free from defects in material and workmanship. • Warming Blankets branded Sunbeam® Imperial Court™, Elite™, Dynasty Nights™, SlumberRest Arctic Dawn™, Nordic Dreams™, Winter Oasis™, Basic™ and Northern Illusions™, and Sunbeam® The Blanket with a Brain® will carry a FIVE year limited warranty.
How to obtain warranty service: We’re Here to Help. For any questions you may have about your warming product, please contact Sunbeam Consumer Service: 1-800-892-7684, or write with product questions to: SUNBEAM CONSUMER SERVICE P.O. Box 948389 Maitland, FL 32794-8389 or visit our web site at: www.sunbeambedding.com.
RPOB 9/02 021 T STAMP HERE PLACE FIRST-CLASS ▲ PLEASE FOLD AND SEAL WITH TAPE BEFORE MAILING. DO NOT STAPLE. REGISTER ONLINE AT: WWW.SUNBEAMBEDDING.COM ▲ We value your input! Your responses will help us bring you new products specifically designed to meet your needs. HELP US DEVELOP NEW PRODUCTS: We will keep the model number and date of purchase of your new Sunbeam product on file to help you refer to this information when necessary.
Day Year 3. Warming throw .00 A. Everyday Last name: 15 16 17 18 19 Apt number: Month 021 T Year 2. Single 2. Female Day 1. Married 1. Male Your marital status: Your gender: Date of your birth: (Examples: 01, 02, 03, 04...) Including yourself, what is the total number of people living in your household? Month Year Year Male Female 1. 2. 1. 2.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.