b38809 19 Jue 2004 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING Lighted Lamp is HOT WARNING — To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UY, RADIATION , OR INJURY TO PERSONS : . Turn off / unplug and allow to cool before replacing lamp. . Lamp gets HOT quickly! Only contact switch / plug when turning on. . Do not touch hot lamp containment barrier .
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio TV technician for help. Note: This product may cause interference to radio equipment and should not be installed near maritime satisfy communications equipment or other critical navigation or communication equipment operating between 0.45.30 MHz.
Power Control Knob Arms Age — b3sg0g 19 JUL 2 i 4 General Instructions Diagram of Part Adjustment Knobs Lamp Cover Lamp (FML27)
Assembly 1. Remove the plastic packing materials from the light fixture. 2. Remove (he foam shipping guard from behind the per-installed lamp. Note : The lamp socket pivots out. Be certain to push the lamp and socket back into the fixture. {See Figure A below.) NN oo Figure A 3. To adjust the lamp height and angle, loosen the knobs on the fixture arms and move the arms to the desired height and angle, then tighten the knobs to secure the new positions, Operation 1.
15 jun 2004 38809 2. Replace with a new lamp. Replacement lamps are available from The Sharper Image (Item No.81928). Do not use any other lamp with this product. 3. Gently push the lamp and socket back into place. (See Figure C below.