Getting Started With Your LTE PDA Model: N5004L
Index N5004L Overview N5004L Overview 3 Setting up Your Phone 4 Safety information 6 Front/Back Rear camera Certificate 10 Warranty information & Registration 12 Volume control Customer Support 13 Wake/Sleep button Rear camera flash Speaker Bottom Type-C connector 3
Setting Up Your Phone Follow these step-by-step instructions to set up your N5004L. Power off the phone before inserting any cards! 1 Remove Back Cover • Remove the back cover by prying the lower left corner of your device. 2 2 Insert SIM • Orient SIM card to match diagram on slot. • SIM (Nano) support 4G LTE connections. 3 Replace Back Cover • After installing the SIM card, memory card, and battery, align the cover and snap it closed. Be sure to press all around the edges to ensure a secure fit.
Safety information • This section contains important information about the operation of your device, it also contains information about how to use the device safely. Read this information carefully before using your device. Electronic device Do not use your device if using the device is prohibited. • Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods. Do not use the device if doing so causes danger or interference with other electronic devices.
• Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode if overheated. Environmental protection • Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose it to water or other liquids. Doing so may lead to fire, explosion, or other hazards.
FCC Information FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC STATEMENT This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.
Warranty information Please visit our website for details on warranty information. www.nuumobile.com Warranty Registration Register Your Device Thank you for choosing NUU mobile. To receive helpful tips and faster tech support, register your device online at Customer Support Questions? Let us help. We’re here to support you. Hong Kong: Service Center: 16F, CEO Tower, 77 Wing Hong St. Kowloon, Hong Kong. Phone: (852) 2725-0161 HK hours: M-F 9:00am-5:30pm CT Email: cs@nuumobile.
Learn more about NUU Mobile products, features and accessories at www.nuumobile.
