GSM Mobile Phone Brand Name: GIGO,SUM, MAMBA MOBILE Model Name: NITRO FCC ID: RWVNITRO
Phone user manual Preface Thank you for choosing NITRO mobile phone! NITRO is an Android intelligent mobile phone, it has the ultra-thin fashion appearance, it supports application software installation and unloading from Android electronic market, WLAN network connection, touch capacitive screen, high-pixels cameras, high-quality audio and ultra HD video, etc. These will lead you into an entirely new and fascinating mobile internet world.
Basic Information 1. Safety Notice If your phone is lost or stolen, please immediately inform the telecom department or commission agents of forbidding the use of SIM card, so that avoid the economic loss caused by false calling of others. When you contact with telecom department or commission agents, they need to know your phone IMEI number (printed on the label on the back of the phone and can be found after taking down the battery). Please copy the number and keep it safe for future use.
Please don’t place the phone in the places with high temperature, high humidity or a large amount of dust; otherwise it may cause phone failure. Please don’t place the phone in the uneven or unstable place, prevent the phone from falling off and then cause failure or damage. Please only use the original antenna or the antenna being approved by the company. Unapproved and modified antenna or the antenna with additional accessories may damage the phone. Please don’t touch the antenna during a call.
When installing the battery, don’t apply pressure forcefully; otherwise it may cause liquid leaking, overheat, explosion or fire breakout of the battery. Please don’t make the battery short circuit using the electrical wire, needle and other metal objects; don’t place the battery, necklace and other metal objects together; otherwise it may cause liquid leaking, overheat, explosion or fire breakout of the battery.
Don’t use the charger in the bathroom and other high humidity places; otherwise may cause electric shock, fire breakout or charger damage. Please don’t contact the charger, electrical wire and power socket with wet hands; otherwise it may cause electric shock. Don’t place heavy object on the power cord or reconstruct the electrical wire; otherwise may cause electric shock or fire breakout. Please pull out the charger plug from power sockert before the cleaning and maintenance.
Contents Ⅰ. SAFETY PRECAUTIONS · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·9 Ⅱ.
20. ATV · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·24 21. SETTINGS.............................................................................................................................................
Ⅰ. Safety Precautions Before using a mobile phone, please read and observe the following rules. While driving or answering a call, Mobile phone interferes with aircraft please use an earphone or stop communication, please ensure that your car. mobile phone power off during the entire flight. All mobile phones may be disturbed, and affect their performance. Please don’t use mobile phone and turn off your phone where medical equipments exist.
Ⅱ. Before Use 1. Install and Unload SIM Card 1.1 About SIM Card Before using the phone, you must insert valid SIM (Subscriber Identity Module) card in the phone. SIM card provided by network supplier. All the information related to network connection are recorded in the chip of SIM card, also the names, telephone numbers and SMS that storing in the name card holder of SIM card. You can take out SIM card from your phone, and use it in any GSM mobile phone (new mobile phone can read SIM card automatically).
charging is processing; when the stripe is full of the whole icon and stop scrolling, which means that the battery charging is completed; when the charging is completed, please pull out the plug. When electric quantity is not enough, warning message will be sent; and electric quantity shows empty. When electric quantity is too low, the phone will power off automatically.
2. Turn On /Off Screen 2.1 Turn Off Screen Please short press [Power] to turn off the screen to save power. Prompt: To save power, you can also set screen timeout time in Display Settings, when the timeout time is up, without any operation during the standby time, the screen will shut off automatically. 2.2 Turn On Screen When the screen is off, please short press [Power] to wake up the screen. 3. Lock and Unlock 3.1 Lock Please press [Power] to lock this screen to prevent some unexpected operations.
10.2 Running App. You can view the running applications on Notification bar. Tips: In any interface, long press【Home】,it displays the pop-up box of “Recent Apps and Running Apps”. Touch the option of “Recent Apps” ,you can view the recently running applications, choose and click one, you can enter directly this application; Touch “Running Apps” to view the currently running applications, click one to kill it from progress. 10.3 USB Status You can view USB connection state. 10.
[ Home ] Button Short press to return to the desktop. Long press to view the latest task. [ Back ] Button Press to return to the upper layer. [ Volume ] Key Press [Volume+] to turn the call voice louder; press [Volume-] to turn lower. [ Power ] Key Long press [Power] key to power on or off mobile phone. Short press [Power] key to end a call when a call is talking. Or make the calling tune mute when a call is coming. Short press [Power] key to turn off & lock the screen in any interface.
After entering Call Log, choose a call record, click , then choose SIM1 or SIM2 to make a call by SIM1 or SIM2. 2.2. Answer a Call When an incoming call arrives, the phone will give out the corresponding prompt (such as vibration, ringtone, and etc.); if network support, the phone screen will show the name and telephone number of the caller, slide rightward, answer this call. 2.3. Refuse a Call When a call is coming in, slide leftward, refuse this call. 2.4.
Only contacts with phones Only display contacts that have phone numbers in contacts list. Sort list by Set contact names to display by First Name or Last Name. View contact names as Set view style of contact names as First Name First or Last Name First. Choose contacts to display Set classification of contacts to display in contacts list with Phone or SIM1or SIM2. 3.1.4. Contacts Group Set contact group, such as Student, Friend, Family, Colleague. 3.1.5.
4. Call log Enter Call log. 4.1. Call log list After entering Call log, it displays all call records. Choose and touch one of call records, enter its details. Click [ Menu ], choose “Search” to operate the following: 4.1.1. Search On call-log search interface, input key words to search a call record. 4.2. Call log Details On call record details, click to dial this call record number by SIM1 or SIM2.
Cell Broadcast SMS Enabled: Enable or Disable Cell Broadcast SMS. Read: Read the received messages. Language Setting: Set the languages of Cell Broadcast SMS. Channel: Set the channel to receive the area message. Add the channel: Add the channel index and channel name. Edit channel: Touch the saved channel to enter its edit interface, and edit this channel again. Delete channel: Delete all channels. 5.1.2. Long Press Menu Long press a message, display its long press Menu. 5.2.
8. Email On Main menu, nter Email. You can use (this device) it to receive or send your Email anywhere or at any time. Note: E-mail can be used normally when the wireless network is well connected. 8.1. Create Account When entering Email for the first time, it will directly enter new account edit interface, input Email address, password, choose the corresponding parameters of POP3, IMAP & Exchange Server, then touch [Next], through POP3 and SMTP server detection, complete Email account creation. 8.2.
On the play interface, when there are songs in the playlist, touch to play; touch pause. Drag the slider from left to right to fast-forward or rewind. Touch playing the current song. Touch to play the to repeat playing all songs, touch previous or the next song. Touch to set shuffle on or off. Touch to to repeat to access to playlist. Press [Volume] key to adjust the volume. Press [ Menu] , operate the following: 9.2. Library: Access to songs library.
In the folders list, choose and touch a photo folder to enter, slide from left to right to view pictures list. Touch a picture or photo to enter its view. 10.1.1. Picture List In the pictures list, touch whole picture list. to switch pictures display style, drag to view the Press [ Menu ] , operate the following: Share: Share the chosen pictures by Bluetooth or Email or Messaging. Delete: Delete the chosen picture(s). More: include Details, Set as, Crop, Rotate Left, Rotate Right.
After switching into Video Recorder, touch other operations refer to Camera. begin to camcorder; touch to stop. The 13. FM Radio On Main menu, enter FM Radio interface, then you can listen to FM radio freely.
15.2. Option Menu On files or folders directory interface, press [ Menu ] to display option menu, perform the following: Operations: Display operations menu, including: Cut, Copy, Rename, Delete, Select All, Set As Home, Properties. New: Display options menu of New, including: File, Folder, Search. Manager: Display options menu of Manager, including: Task Manager, App Manager, Security Manager, Bookmark Manager, SD Card Analyst.
17. Clock After entering Clock, touch access to Music player; touch to set Alarm; touch to access to Gallery; touch to to return to the desktop. 18. Calendar On Main menu, enter Calendar. 18.1. Month Display On month display of Calendar, slide the screen up and down to view the previous and the next month calendar. Press [ Menu ] to display option menu, perform the following: Day: Touch this option to switch into Day display. Week: Touch this option to switch into Week display.
21.Settings In settings, you can perform: Wireless controls, Sound settings, Display settings, Security & location, Applications, SD Card and Local disk, Date and time, Accessibility, Speech synthesis, About phone, etc. 21.1.Dual SIM Settings: Standby SIM Card Setting: Set SIM1 or SIM2 or SIM1+SIM2 standby. Data connection Setting: Set data connection of SIM1 or SIM2. Message settings: Set message settings for SIM1 or SIM2 or Always Ask. 21.
21.1.1.5. Scan for devices: Touch this item to search the Bluetooth devices nearby. 21.1.1.6. Bluetooth devices List: When this device find other Bluetooth devices nearby, it will display them in this list, you can click one and then input PIN for matching and connection. 21.2.4. Tethering Share your phone’s mobile data connection via USB. 21.2.5. VPN Settings In VPN settings, you can add a new VPN, set VPN server, enable Encryption, DNS search domains, etc.
21.1.1.19. Call barring settings Call barring settings include All outgoing, Outgoing international, Outgoing internation roaming, All incoming, Icoming calls when roaming, Deactivate all, Change password. 21.1.1.20. Additional Settings: Caller ID: Display my number in outgoing calls. Call Waiting: After call waiting function is activated, during a call, notify me of incoming calls. 20.1.6. IP dialing You can set IP dialing ON, and set the IP numbers list. 20.1.7.
min, etc. 20.4.Location & security You can set My Location or Screen Unlock or SIM Card Lock or Passwords or Credential Storage. 20.4.1. My Location Touch this item to switch between “On” and “Off”. If it is “On”, the device location can be determined by WLAN. 20.4.2. Screen Unlock You can set Set up screen lock. 21.1.1.27. None: Disable screen unlock security. 21.1.1.28. Pattern: Draw pattern to unlock screen. 21.1.1.29. PIN: Enter a numeric PIN to unlock screen. 21.1.1.30.
21.1.1.37. USB Debugging: Open or close USB debugging mode when USB is connected. 21.1.1.38. USB settings: Set USB connection, Charge Only, USB tethering, USB storage, Remenber my choice. 21.1.1.39. Stay Awake: The screen will never sleep during charging if this function is “On”; If it is “Off”, the screen can sleep during charging. 21.1.1.40. Allow Mock Locations: The position can be simulated during debugging. 20.6. Accounts & Sync You can perform adding accounts and Sync settings. 20.6.1.
Touch this item to switch between “On” and “Off”. If it is set as “On”, it updates the date and time automatically. This function is based on the services provided by the network. Note: When this item is initiated, “Set Date”, “Select Time Zone” and “Set Time” are not available. 20.12.2. Set Date With time updating “Off”, touch it to display the dialog box of Date Setting. Note: The date scope is from Jan. 1, 1970 to Dec. 31, 2037. 20.12.3.
Important Regulatory Information FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. TIPS ON EFFICIENT OPERATION: For your phone to operate most efficiently: • Extend your antenna fully. • Do not touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.
50℃ ,the device may not work. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Ad Hoc function is supported but not able to operate on non-US frequencies.