CKPUMPKIT Assembly Instructions for Your Kitchenette Water Pump MODELS: C48ELPUMP C48ELGLASSPUMP Write Serial Number (on lower left corner of inside cabinet) here: Serial No.: _______________________ Felix Storch, Inc. An ISO 9001:2015 registered company 770 Garrison Avenue The Bronx, NY 10474 www.summitappliance.
Pump Kit Installation – CKPUMPKIT Component Quantity Bottled Water Dispenser Pump System, 20ft 110V AC US Plug Water Dispensing Pump 1 5 Gallon Freshwater Container 1 6 Gallon Waste Container 1 3/8 in. Brass Water Cut-off Valve 1 1/4" Acetal Copolymer Compression Sleeve 1 20 in. Length Braided Stainless Steel Faucet Connector 2 1-1/2-in Flexible Plastic Drainage Pipe 1 Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · info@summitappliance.
1/2 in. x 520 in. White Teflon Tape 1 Mounting Template (18x12) 1 10-32 x 1 1/4" Phillips Head Truss Screw Stainless Steel 4 10-32 Nylon Lock Nut Stainless Steel 4 10 x 5/8" Fender Washer Stainless Steel 4 Installation Instructions 1) Open the cabinet of your combo kitchen. Move the wire shelf to the floor of the cabinet. This is to ensure nothing sits directly on the floor, keeping any cords or wires dry.
8) The pump has two tubes, a thinner tube which runs to the metal water cut-off valve and a thicker water pull tube, which pulls water from your freshwater jug. 9) To connect the pump to the valve, place the valve nut over the water line. 10) The plastic sleeve has a wider and a narrower side. Place the plastic sleeve onto the water line through the larger side. 11) Insert the metal flange into the end of the water line as far as it will go.