Order Number : GETEC-C1-19-287 FCC Part 15 subpart C & FCC Part 15 subpart E Test Report Number : GETEC-E3-19-008 Page 1 / 1 APPENDIX H : USER’S MANUAL EUT Type: Remote Controller FCC ID.
TRC-1480 Owner’s Manual
Table of Contents Congratulations!.................................................................................................................................................................................................................................................................1 Features & Benefits........................................................................................................................................................................................................
Congratulations! Thank you for purchasing the TRC-1480 Wi-Fi remote control for your Total Control 2.0 system. The TRC-1480 connects to the local wireless network to control devices throughout your home/business automation system. Use the TRC-1480 to navigate through Total Control’s menus to control your system’s audio/video devices, climate, lighting, and more.
Requirements & Compatibility: ● Total Control 2.0 & Flex 2.0 Compatible: When used with an MRX Advanced System Controller, the TRC-1480 is capable of controlling devices around the home/business without being within “line-ofsight” of the equipment. The TRC-1480 sends commands over the system’s local area network (Wi-Fi). ● Programmable Only by a URC Certified Professional Programmer: Only a trained and certified professional URC installer can install and program a TRC-1480 remote control.
Connecting the Battery Pack: A battery is included in the box when shipped from the factory. Press the spring lock down to unlock and remove the cover. Place the battery into the battery compartment, making sure to align the contacts on the battery with the contacts within the TRC-1480’s battery compartment. The battery snaps into place when aligned properly. Replace the battery cover. Using the Charging Cradle: Plug the 5V DC adapter into a power outlet and into the rear of the charging cradle.
Using the TRC-1480: The Main Menu pages display the activities and devices in the system. Press the Main button to access the Main Menu. Larger systems may have more than one (1) page. Press either of the Page buttons to view additional Main Menu pages. Although the TRC-1480 is programmed with custom layouts and devices, there are persistent buttons that maintain a steady function: a. Rooms Menu: This button displays a list of rooms and allows the user to swap between them for control. b.
h. Shortcuts: Displays the customizable shortcuts menu. This menu can only contain shortcuts to room-based devices/activities. i. Now Playing: Returns the user to the current activity Menu regardless of what screen is on display. j. Microphone: Select this button to interact with the native voice assistant service. When press, the microphone activates and listens to your verbal commands. The microphone is shut off when the button is no longer pressed. k.
q. Transport Buttons: These are the available buttons: ● Play ● Skip+ ● Pause ● Skip- ● Stop ● Rew ● Record ● FF (fast forward) r. Numerical Keypad: Numbered buttons to change channels.
Displaying the Setup Menu The Setup Menu allows users to configure or change certain behaviors of the TRC-1480. Enter the Setup Menu by pressing and holding the Main and Enter (see image at the right) buttons for greater than five (5) seconds. The Setup Menu times out after 60 seconds and returns the TRC-1480 to the system’s Main Menu. Use the up and down navigation buttons to maneuver between the two Setup pages.
Sleep Timers: Adjust the amount of time the screen remains on when the remote is not in use. The time can be set independently based on whether the remote is using battery power or sitting on the charging cradle. Once the settings are adjusted, press the Save button. Pressing Cancel reverts the remote to the last saved setting. Leaving the remote’s display on for long periods of time may reduce your device’s battery life.
Voice Assistant: This Settings Menu option allows you to integrate your Total Control system with voice assistant services such as Amazon Alexa. Choose the supported voice assistant service (Amazon Alexa) and follow the onscreen directions. The Alexa setup menu provides code that must be entered into the Amazon Alexa mobile app (iOS and/or Android). Once enabled, use the push-to-talk button to control the Total Control system via Amazon Alexa (setup REQUIRED).
Brightness: Adjust the screen brightness by pressing the adjacent LCD buttons to increase or decrease the brightness level. Once the brightness has been adjusted, press the Save button. Pressing Cancel reverts the remote to the last saved setting. High brightness levels may reduce affect the TRC-1480’s battery life. System: Displays information about the remote’s operating system, memory, etc. Press the More button to view further system information.
Button Light: Adjust the brightness of the remote’s button backlighting. Press the adjacent LCD buttons to increase or decrease the button backlighting. Once the button backlight has been adjusted, press the Save button. Pressing Cancel reverts the remote to the last saved setting. Brighter button light levels may reduce the TRC-1480’s battery life. Power: Displays the remote’s remaining battery level. Adjust when the “Low Battery” warning screen appears.
Date & Time: The remote’s date and time settings have been set by your certified custom integrator. If needed, the date and time settings can be manually changed here. If the system’s date and time are adjusted, the Total Control system adopts the new date and time globally. Once the date and time settings have been adjusted, press the Save button. Pressing Cancel reverts the remote to the last saved setting. Button Beep: Adjust the button “beep” of the remote.
Pickup: Turn on or off the remote’s pickup sensor. When enabled, the TRC-1480 turns on when the remote is picked up. Select Yes (turn on) or No (turn off). Enabling the pickup sensor may reduce the TRC-1480’s battery life. Software Update: URC’s system has the ability to be programmed by a certified URC programmer remotely (after initial installation). Because this remote connects to the network via Wi-Fi, the device may sometimes need to have the software update applied manually.
Factory Default: Resets the memory of the TRC-1480 to the factory settings. All existing programming is erased and requires configuration by your certified URC integrator. WARNING! Only use this button when instructed by URC’s Technical Support team.
Specifications: Microprocessor: ARM Cortex-A35 Core 1.5GHz x 4 RAM: 8GB eMMC, DDR3 256MB RAM LCD: 2.4” TFT-LCD, 262K Colors, Backlight By LED Touch Window: Capacitive Touch Sound: Mono, Normal 1 watt Devices: Supports up to 255 devices with text, less with heavy graphics Usage Pages: Supports up to 255 pages on each devices with text, less with heavy graphics usage Macro Capability: Up to 255 steps each; however, nesting is supported. Wi-Fi: IEEE 802.
equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to promptly cause such to comply. Warranty Statement: 1. LIMITED WARRANTY AND DISCLAIMERS Universal Remote Control, Inc.
BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE. The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are restricted or excluded by applicable law, and such shall apply to the maximum extent permitted by applicable law. In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE. Precautions and Information Concerning Rechargeable Lithium Polymer Battery: IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END USER OR ANY THIRD PARTY.
FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of Conformity: Company Name : Summit Technology, Inc Company Address : 130, Digital-ro, Namsung Plaza Suite 611, Geumcheon-gu, Seoul, Korea Contact Information : Phone: (+82)-2-6929-3161 Product Name : RF Remote Controller Model Name : TRC-1480 ● Radio Equipment Directive ■ EN 62368-1 (2014) + A11 (2017) ■ ETSI EN 301 489-17 V3.1.1 (2016) ■ EN 62479 (2010 ■ ETSI EN 300 328 V2.1.1 (2016) ■ ETSI EN 301 489-1 V2.1.1 (2016) ● Test Report No.
