User's Manual

V900 REMOTE CONTROL
USER MANUAL
Thank you for purchasing V900 remote control. Completely operation and
product function information refer in this manual.
1、 V900 remote control suits for V900 GSM remote camera.
2、 V900 remote control instruction
1. Antenna
2. Indicator light
3. Set defense key (Arm)
4. Cancel defense key (Disarm)
5. Emergency key
3、 Operation guide
3.1 Add remote control to V900 GSM remote camera
Press the set key
on the rear board of the camera host and the camera
indicator turn to flash slowly with orange color. Then press any key of the
remote control. When the camera host receives the new wireless remote
control signal, a “Di …” tone will be heard and the camera indicator will turn
green for 2 seconds then turn to orange, flash slowly. It can continue to load
new remote control in this time. The camera will automatically exit from the
learning status after 15 seconds, or press the set key
of the camera to exit
directly.
3.2 Arming the V900 remote camera (Set defense)
When press the Set defense
key, the camera indicator will turn constant green,
and the camera enter the defense state. If the wireless detector or motion